Need the Megan Racing EU Series Coilover Springs System For 17+ Audi A4/A5 53mm Bracket? We hold inventory, check every order and dispatch the same business day.
Suspension components keep the tire pressed to the road, which is the foundation of both braking and steering. Replace in axle pairs so both sides damp and settle identically.
Every megan racing eu series coilover springs order goes through the same fitment review.
Ordering the megan racing eu series coilover springs takes a minute and the confirmation reaches you straight away.
Our team knows the megan racing eu series coilover springs well, so ask if anything about the specification is unclear.
Stock of the megan racing eu series coilover springs is live on this page rather than estimated.
Shops order the megan racing eu series coilover springs from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the megan racing eu series coilover springs against it.
The megan racing eu series coilover springs ships protected, because a damaged part helps nobody.
Drivers choose the megan racing eu series coilover springs here for honest specification detail and quick dispatch.
Buyers comparing the megan racing eu series coilover springs will find the specification detail on this page rather than in a catalog footnote.
Details that matter
- Category: Shocks & Springs
- Price: $998.75 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
Our EU Series coilover system for the Audi A4/A5 has been developed prioritizing ride comfort for those who are seeking to increase the vehicle’s exterior aesthetics while still retaining a nice ride. By using rubber front top mounts and OE factory rear mount, road noise is further insulated and kept away from the interior cabin. However with a slight increase of spring rates over stock and sport tuned shock valving, our kit is still more than capable enough for spirited driving or dare we even say track use.
Megan Racing EU Series Suspension Systems are fully adjustable coilover systems which do not break the bank. With it’s full length adjustable design, the vehicle’s ride height can be adjusted without affecting the shock stroke ensuring a retained ride quality at nearly any height. Monotube internal shock construction separates the oil and hi pressured Nitrogen gas chamber preventing aeration. This allows for immediate shock response and damping consistency. 30-click damping force adjustability will also allow the user to fine tune the ride stiffness and response to his or her preference.
- Material: CNC Machined Steel and Aluminum Construction
- Color: Green
- Surface Finish: Anodized
- Type: Suspension Coilover
- Style: EU Series
- Front Spring Rate: 10kg/mm
- Rear Spring Rate: 8kg/mm
- 30-Level Damper Compression & Rebound Simultaneous
- Full Length Adjustability
- Monotube Internal Single Cylinder Construction
- Aluminum Brackets paired with rubber inserts
Application:
For 2017+ Audi A4 with 53mm Bracket (B9)
For 2017+ Audi A4 allroad with 53mm Bracket (B9)
For 2017+ Audi A5 with 53mm Bracket (8W6)
For 2017+ Audi A5 Sportback with 53mm Bracket (8W6)
Remark: Fit Models with 53mm Lower Strut Bracket Diameter. Will not fit Dynamic Digital Suspension (DDS)
Installation: Must Re-Used Rear Factory Top Mounts
For vehicles equipped with 53mm lower strut diameters. Please search part# MR-CDK-AA517-48-EU if you have the 48mm struts. Vehicles equipped with DDC must either purchase replacement OEM rear top mounts or “de-pin” the shock wiring harness in order to remove the mount currently on the vehicle.
Product Content:
- 1 x Set of Coilover Spring Kit (2 Front + 2 Rear)
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- MR-CDK-AA517-53-EU, MRCDKAA51753EU
Suggest Damper Level Of Adjustment:
LV 1-8: Suggested for track use.
LV 9-16: Suggested for mountain/aggressive use.
LV 17-32: Suggested for common street use.
All Megan Racing Exhaust and Suspension
products are deemed for “OFF ROAD USE ONLY”
Please note that the measurements provided are
from our prototype coilovers in comparison to the test vehicles’
pre-installation suspension, and may not be of actual stock height. These
numbers are used only as a reference point from our testing, and may or may not
reflect the total capacity of the suspension system. Depending factors are the
other various suspension components you may or may not have on your vehicle such
as parts that affect toe angle, camber, etc. The coilovers may have a higher
adjustment rate due to the test vehicle being pre-lowered rather than OE parts.
Any item installed/mounted/used is not returnable.
Not sure it matches your vehicle? Send your VIN or your year, make and model and our fitment desk will confirm before you order.
Keep shopping: Suspension & Steering · Rocar RC-SM0040 Front Left+Right Shocks Strut Mount For 00-06 Mazda MPV (LW 2nd Gen) · Rocar RC-SM0039 Front Left+Right Shocks Strut Mount For 89-98 Mazda MPV (LV 1st Gen) · full catalog
Delivery estimates appear at checkout for your address, with no padding added to the carriage price.
Independent information on this topic lives at the Car Care Council maintenance tips.
Common questions
How do I know this is the right part?
The application text on this page lists what the part serves. If your vehicle is not clearly covered, send the VIN and we will rule on it before you pay.
How fast does this ship?
Most orders dispatch within one business day. You receive tracking by email the moment the parcel is handed to the carrier.
What if it does not fit?
A straightforward returns window applies from delivery. Keep the original packaging until you have test fitted the part and contact support for a fast exchange or refund.
Is this checked before shipping?
Suspension parts are matched to ride height, spring rate and side specific fitment before dispatch.
Reviews
There are no reviews yet.