Free shipping over $99/Fitment guaranteed/Same-day dispatch before 3pm ET
,

HPS 5/8″ (16mm) ID, with 5″ and 18″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose

$53.62

HPS 5/8″ (16mm) ID, with 5″ and 18″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose

The HPS 5/8″ (16mm) ID, with 5″ and 18″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose sits in the Hoses & Fittings department here, stocked and fitment checked.

HPS 5/8″ (16mm) ID, with 5″ and 18″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose
HPS 5/8″ (16mm) ID, with 5″ and 18″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose as supplied by PartSmith Co.

Hoses and fittings work under pressure and heat, where material choice decides service life. Re check clamp torque after the first few heat cycles.

If your build is unusual, tell us and we will confirm the leg long black 4-ply reinforced against it.

The leg long black 4-ply reinforced ships protected, because a damaged part helps nobody.

Drivers choose the leg long black 4-ply reinforced here for honest specification detail and quick dispatch.

Buyers comparing the leg long black 4-ply reinforced will find the specification detail on this page rather than in a catalog footnote.

The leg long black 4-ply reinforced listed here is checked against your vehicle before dispatch.

Every leg long black 4-ply reinforced order goes through the same fitment review.

Ordering the leg long black 4-ply reinforced takes a minute and the confirmation reaches you straight away.

At a glance

  • Reinforcement: 4 ply
  • Material: Silicone
  • Finish: Black
  • Category: Universal Hose
  • Price: $53.62 with free shipping over $99
  • Availability: in stock, dispatched from the USA

Manufacturer specifications

HPS 5/8″ (16mm) high temperature 4-ply reinforced Black silicone 90 degree elbow coupler hose with 5″ and 18″ leg meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. This HPS 5/8 inch silicone elbow can be easily trimmed to replace OEM or aftermarket rubber heater hose.

Unlike the traditional rubber heater hose elbow being sold in the auto parts store, HPS performance silicone 90 degree bend elbow coupling hose is designed and engineered to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, heater hoses, supercharger aftercoolers, and air-to-water heat exchangers.

The flexible line makes maneuvering the hose in the engine bay a quick and pain-free process.

Technical Specification
Product Type: Silicone 90 Degree Elbow Coupler Hose
Temperature Range: -65 deg. F to + 350 deg. F (177 deg. C)
Reinforced Layer: 4-ply polyester
Hose Inside Diameter: 5/8″ (16mm)
Hose Outside Diameter: 1″ (25mm)
Leg Length: 5″ and 18″
Center Line Radius: 1″
Wall Thickness: 5mm +/- 0.5mm
Color: Black
UV and ozone resistant

Remark: Silicone hose is NOT compatible with fuel or oil.
Silicone hose is compatible with water or anti-freeze such as coolant.

  • Material: 4-Ply Reinforced Silicone
  • Color: Black
  • Leg length: 5″ and 18″. Can be easily trimmed to replace OEM or aftermarket rubber heater hose.
  • Made of High Temperature 4-ply Reinforced Silicone (Maximum temperature rating 350F)
  • Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications
  • UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil
  • Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system

Application:

Universal Fit

Remark:

Installation: Compatible with Water/Coolant ONLY, Not for Fuel/Oil

Product Content:

  • 1 x 90 Degree Elbow Coupler Hose

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

  • HTSEC90-062-L5X18-BLK, HTSEC90062L5X18BLK

Message us the vehicle details and we will confirm compatibility, including anything unusual about your build.

More in this department: Hoses & Fittings · HPS 2.25″ (57mm) ID, 6″ Leg Long Black 4-Ply Silicone 1/2″ Offset Coupler Hose · HPS 1.75″ (45mm) ID, 6″ Leg Long Black 4-Ply Silicone 1/2″ Offset Coupler Hose · full catalog

Your order is picked, inspected and packed by a person, then handed to the carrier with tracking the same day.

Before you start the job, the Car Care Council maintenance tips is worth five minutes.

Questions we get about this part

How do I confirm this fits?

Send your VIN or your year, make and model and our fitment desk confirms the part against manufacturer data before it ships. The check is free and usually answered the same business day.

How fast does this ship?

Most orders dispatch within one business day. You receive tracking by email the moment the parcel is handed to the carrier.

What is the return policy?

If the part does not fit, message our support desk with the order number and we will arrange an exchange or refund. Keep the packaging until the test fit is done.

Is this checked before shipping?

We verify diameter and reinforcement specification on every hose order.

Reviews

There are no reviews yet.

Be the first to review “HPS 5/8″ (16mm) ID, with 5″ and 18″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose”

Your email address will not be published. Required fields are marked *

Scroll to Top