HPS Red Silicone Oil Cooler Hose Kit (1PC) For 90-93 Dodge D250 W250 Cummins B-series I6 5.9L Diesel

Looking for the HPS Red Silicone Oil Cooler Hose Kit (1PC) For 90-93 Dodge D250 W250 Cummins B-series I6 5.9L Diesel? It is on the shelf here, checked and ready to ship.

Silicone tolerates far more heat than standard rubber and stays flexible for many years. Replace both the upper and lower runs while the system is open.

Drivers choose the hps red silicone oil cooler hose kit here for honest specification detail and quick dispatch.

Buyers comparing the hps red silicone oil cooler hose kit will find the specification detail on this page rather than in a catalog footnote.

The hps red silicone oil cooler hose kit listed here is checked against your vehicle before dispatch.

Every hps red silicone oil cooler hose kit order goes through the same fitment review.

Ordering the hps red silicone oil cooler hose kit takes a minute and the confirmation reaches you straight away.

Our team knows the hps red silicone oil cooler hose kit well, so ask if anything about the specification is unclear.

Stock of the hps red silicone oil cooler hose kit is live on this page rather than estimated.

The important numbers

• Engine: 5.9L
• Material: Silicone
• Finish: Red
• Category: Hose Kits
• Price: $51.98 with free shipping over $99
• Availability: in stock, dispatched from the USA

Manufacturer specifications

HPS high temperature 3-ply reinforced silicone oil cooler elbow hose (part number 57-1881) replaces hard to find 1990-1993 Dodge D250 W250 Pickup Cummins 5.9L Diesel Turbo stock OEM rubber oil cooler coolant hoses with high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F). To replace all the elbows on the vehicle, you will need quantity of 4 elbows.

• Material: 3-Ply Reinforced Silicone
• Color: Red
• Ideal replacement or upgrade for OEM or aftermarket parts. 4638427,03918266, 04429813
• The premium grade high-heat resistance 3-ply reinforced silicone hoses are made with correct bends and curves to ensure a perfect fitment.
• Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber hose. Made with correct bends and curves for perfect fitment.
• Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat.
• Includes 100% stainless steel industrial grade embossed hose clamps which would not cut through the silicone hose.

Application:

For 1990-1993 Dodge D250 Cummins B-series I6 5.9L Diesel
For 1990-1993 Dodge W250 Cummins B-series I6 5.9L Diesel

Remark: Please refer to listing diagram, if you need replace all elbows for your D250/W250, you will need quantity of 4 elbows.

Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.

Product Content:

• 1 Set x Oil Cooler Hose Kit
  Hardware if Any is Shown in the Picture Above
  IMPORTANT: Please refer to listing diagram, if you need replace all elbows for your D250/W250, you will need quantity of 4 elbows.

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

• 57-1881-RED, 571881RED, 4638427,03918266, 04429813

If your vehicle has been modified, tell us, since the factory data will not show a previous owner changes.

More in this department: Hoses & Fittings · HPS Red Silicone Heater Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Blue Silicone Heater Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog

Orders placed before early afternoon usually leave our USA warehouse the same business day, with tracking emailed at label creation.

For safety and service guidance from outside the aftermarket, see the fuel economy maintenance guidance.

Questions we get about this part