The HPS Red Silicone Intake Hose Kit For 16-22 Tacoma 3.5L V6 N300 equipped with TRD Airbox is ready to ship today, with the paperwork and specs that back it up.
Petroleum contact requires the correct lining, so fuel and oil routing needs the right specification. Keep petroleum away from standard silicone unless the hose is lined for it.
Ordering the hps red silicone intake hose kit for 16 takes a minute and the confirmation reaches you straight away.
Our team knows the hps red silicone intake hose kit for 16 well, so ask if anything about the specification is unclear.
Stock of the hps red silicone intake hose kit for 16 is live on this page rather than estimated.
Shops order the hps red silicone intake hose kit for 16 from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the hps red silicone intake hose kit for 16 against it.
The hps red silicone intake hose kit for 16 ships protected, because a damaged part helps nobody.
Drivers choose the hps red silicone intake hose kit for 16 here for honest specification detail and quick dispatch.
Specifications
- Engine: 3.5L V6
- Material: Silicone
- Finish: Red
- Category: Hose Kits
- Price: $236.24 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS high temperature 4-ply reinforced silicone air intake hose kit replaces the TRD Performance air intake hose with high-heat resistant material which meets or exceeds OE specifications for a maximum temperature rating of 350 degrees Fahrenheit. By replacing the TRD intake tube with the HPS silicone air intake kit, dyno testing shows increased performance output of 21.9 horsepower and 28.8 lb-ft. of torque. Acceleration is greatly improved over the standard TRD parts.
This intake kit retains the use of the TRD air filter housing, minimizing the number of parts to change and keeping the installation simple. This replacement upgrade includes HPS 100% stainless steel embossed hose clamps that are fit for harshest driving conditions. No modifications are required to install this kit. REMARK: ONLY fits Toyota Tacoma with a TRD Performance Upper Airbox.
- Material: 4-Ply Reinforced Silicone
- Color: Red
- Powerful upgrade to the Toyota TRD Performance Air Intake that adds 21.9 horsepower and 28.8 lb-ft. of torque for faster acceleration and better throttle response.;Intensifies induction sound during acceleration.
- Intensifies induction sound during acceleration.
- Minimizes heat soak to maintain peak performance under any driving condition.
- Includes HPS 100% stainless steel embossed hose clamps.
- Replaces OEM PN: PTR03-35160-AB, PTR03-35160-AC, PTR03-35160-AD.
Application:
For 2016-2022 Toyota Tacoma 3.5L V6 (N300 3rd Gen) equipped with TRD airbox ONLY
Remark: Part Number 57-2126 only fits 3rd Gen Tacoma equipped with TRD Performance Air Intake System (part # PTR03-35160), if your Tacoma is equipped with standard air intake system (including TRD panel air filter), please purchase part number 57-1600 instead
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Intake Hose Kit
Hardware if Any is Shwon in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-2126-RED, PTR03-35160-AB, PTR03-35160-AC, PTR03-35160-AD , 572126RED
Shops ordering in volume can send a full parts list and we will verify the whole job in one reply.
Browse nearby: Hoses & Fittings · HPS Blue Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · HPS Black Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · full catalog
Finished surfaces are wrapped and hardware is bagged, so the part arrives ready to install.
A neutral reference for this work is the fuel economy maintenance guidance.
Frequently asked questions
Can you check fitment before I order?
We verify every doubtful order by hand. Give us the year, make, model and engine option and we will confirm compatibility in one reply.
How quickly can I get this?
Your tracking link arrives by email at label creation and stays live until delivery, so you can follow the parcel the whole way.
How do returns work here?
Returns are handled in one reply for most cases. Keep your order confirmation, since it is the only proof of purchase we need.
How do you verify this part?
We verify diameter and reinforcement specification on every hose order.
![HPS AN Male to Metric Adapter Fitting [Straight] [-8 to M14 x 1.25] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_2d43096e-0176-48a6-aafa-d4ad5b2e739f-300x300.jpg)
![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_b7ae2165-4f89-472c-a9fc-72ba3e09b875-300x300.jpg)
Reviews
There are no reviews yet.