PartSmith Co. keeps the HPS Red Silicone Heater Hose Coolant Kit For 05-13 300/Challenger/Charger/Magnum 5.7L 6.1L 6.4L V8 in stock so your repair is not waiting on a supplier.

Petroleum contact requires the correct lining, so fuel and oil routing needs the right specification. Replace both the upper and lower runs while the system is open.
The hps red silicone heater hose coolant ships protected, because a damaged part helps nobody.
Drivers choose the hps red silicone heater hose coolant here for honest specification detail and quick dispatch.
Buyers comparing the hps red silicone heater hose coolant will find the specification detail on this page rather than in a catalog footnote.
Every hps red silicone heater hose coolant order goes through the same fitment review.
Ordering the hps red silicone heater hose coolant takes a minute and the confirmation reaches you straight away.
Our team knows the hps red silicone heater hose coolant well, so ask if anything about the specification is unclear.
Stock of the hps red silicone heater hose coolant is live on this page rather than estimated.
What you are buying
- Engine: 5.7L
- Material: Silicone
- Finish: Red
- Category: Hose Kits
- Price: $173.14 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS High Temp 3-ply Reinforced Silicone Heater Coolant Hose Kit is designed to replace stock OEM rubber heater hoses which weaken and fail over time. With premium quality silicone and race inspired design, this coolant hose kit can withstand the harsh, high temperature and high pressure operating conditions under the hood through a wide range of driving conditions.
HPS silicone hose kits have all the correct bends and dimensions to perfectly fit as replacements for OEM rubber coolant hoses. Compared to the universal hoses from the local auto store, HPS silicone hose kits are much easier to work with. Maximum temperature rating: 350 degrees Fahrenheit. 100% stainless steel clamps are included for easy installation.
- Material: 3-Ply Reinforced Silicone
- Color: Red
- Replace stock OEM or aftermarket rubber heater coolant hoses. Made with correct bends and curves to ensure a perfect fitment.
- Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed rubber hoses.
- Made of premium grade high-heat resistance 3-ply reinforced silicone hoses.
- Long lasting quality and engineered for extremely high temperature service and prolonged exposure to under-hood and coolant heat.
- Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through the hoses.
Application:
For 2005-2013 Chrysler 300 5.7L 6.1L 6.4L (C, S, SRT8)
For 2008-2013 Dodge Challenger 5.7L 6.1L 6.4L (R/T, SRT8)
For 2006-2013 Dodge Charger 5.7L 6.1L 6.4L (R/T, Pursuit, SE, SRT8)
For 2005-2008 Dodge Magnum 5.7L 6.1L (R/T, SRT8)
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Heater Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-2146-RED, 57-2146
Unsure about the specification? Our desk cross references against manufacturer data at no cost.
Related listings: Hoses & Fittings · HPS Black Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · HPS Red Silicone Heater Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog
Same business day dispatch applies to orders placed before early afternoon, and every parcel travels tracked.
For safety and service guidance from outside the aftermarket, see the NHTSA vehicle safety hub.
Quick answers
Will this part fit my vehicle?
Share your vehicle details with our team and we cross reference this listing before dispatch. Anything doubtful gets a message from us rather than a shipment.
When will my order dispatch?
Orders placed before early afternoon on a business day usually leave our USA warehouse the same day, and tracking is emailed when the label is created.
What happens if it arrives damaged?
Contact support before removing or returning anything, so the right process starts on the first message and nothing is voided by accident.
What quality checks does this get?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.
![HPS AN Male to Metric Adapter Fitting [Straight] [-8 to M14 x 1.25] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_2d43096e-0176-48a6-aafa-d4ad5b2e739f-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 1/4 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_8fbe7cf9-52b7-41cb-9b7c-e7396fcd09ae-300x300.jpg)
![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_b7ae2165-4f89-472c-a9fc-72ba3e09b875-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M20 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_9ea8f01c-f6ee-43ae-9912-654e10e73c03-300x300.jpg)
Reviews
There are no reviews yet.