Free shipping over $99/Fitment guaranteed/Same-day dispatch before 3pm ET
,

HPS Red 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L

$134.66

HPS Red 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L

PartSmith Co. supplies the HPS Red 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L to drivers, shops and fleets across the USA.

HPS Red 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L
HPS Red 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L as supplied by PartSmith Co.

Hoses and fittings work under pressure and heat, where material choice decides service life. Use constant tension or lined clamps so the hose surface survives heat cycles.

Every hps red 3-ply reinforced silicone radiator order goes through the same fitment review.

Ordering the hps red 3-ply reinforced silicone radiator takes a minute and the confirmation reaches you straight away.

Our team knows the hps red 3-ply reinforced silicone radiator well, so ask if anything about the specification is unclear.

Stock of the hps red 3-ply reinforced silicone radiator is live on this page rather than estimated.

Shops order the hps red 3-ply reinforced silicone radiator from us in volume because the data on the page is accurate.

If your build is unusual, tell us and we will confirm the hps red 3-ply reinforced silicone radiator against it.

The hps red 3-ply reinforced silicone radiator ships protected, because a damaged part helps nobody.

Drivers choose the hps red 3-ply reinforced silicone radiator here for honest specification detail and quick dispatch.

The important numbers

  • Engine: 2.4L
  • Reinforcement: 3 ply
  • Material: Silicone
  • Finish: Red
  • Category: Hose Kits
  • Price: $134.66 with free shipping over $99
  • Availability: in stock, dispatched from the USA

Manufacturer specifications

HPS red high temperature 3-ply reinforced silicone hose kit is designed to replace stock OEM rubber lower and upper radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicone radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split coolant hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded.

So maintain your cooling system by replacing the old brittle hoses now before it’s too late. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS silicone hose kit is much easier to work with.

HPS silicone coolant hose kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Each kit includes HPS 100% stainless steel embossed hose clamps which will not cut through the hoses. Remark: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.

  • Material: 3-Ply Reinforced Silicone
  • Color: Red
  • Replace stock OEM or aftermarket rubber radiator coolant hoses. Made with correct bends and curves to ensure a perfect fitment.
  • Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed rubber hoses.
  • Made of premium grade high-heat resistance 3-ply reinforced silicone hoses.
  • Long lasting quality and engineered for extremely high temperature service and prolonged exposure to under-hood and coolant heat.
  • Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through the hoses.

Application:

For 2002-2006 Toyota Carmy 2.4L

Remark:

Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.

Product Content:

  • 1 Set x Radiator Hose Kit
    Hardware if Any is Shown in the Picture Above

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

  • 57-1887-RED, 16571-28080, 16572-28080, 57-1887

If your vehicle has been modified, tell us, since the factory data will not show a previous owner changes.

Also worth a look: Hoses & Fittings · HPS Black Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · HPS Red Silicone Heater Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog

Your order is picked, inspected and packed by a person, then handed to the carrier with tracking the same day.

When you want a second opinion that is not a parts store, read the fuel economy maintenance guidance.

Common questions

What do you need to verify fitment?

Send your VIN or your year, make and model and our fitment desk confirms the part against manufacturer data before it ships. The check is free and usually answered the same business day.

When will my order dispatch?

Most orders dispatch within one business day. You receive tracking by email the moment the parcel is handed to the carrier.

Is there a warranty on this?

If the part does not fit, message our support desk with the order number and we will arrange an exchange or refund. Keep the packaging until the test fit is done.

What happens before my order ships?

Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.

Reviews

There are no reviews yet.

Be the first to review “HPS Red 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L”

Your email address will not be published. Required fields are marked *

Scroll to Top