The HPS Red 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L is ready to ship today, with the paperwork and specs that back it up.

Petroleum contact requires the correct lining, so fuel and oil routing needs the right specification. Replace both the upper and lower runs while the system is open.
Shops order the hps red 3-ply reinforced silicone from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the hps red 3-ply reinforced silicone against it.
The hps red 3-ply reinforced silicone ships protected, because a damaged part helps nobody.
Drivers choose the hps red 3-ply reinforced silicone here for honest specification detail and quick dispatch.
Buyers comparing the hps red 3-ply reinforced silicone will find the specification detail on this page rather than in a catalog footnote.
The hps red 3-ply reinforced silicone listed here is checked against your vehicle before dispatch.
Every hps red 3-ply reinforced silicone order goes through the same fitment review.
Ordering the hps red 3-ply reinforced silicone takes a minute and the confirmation reaches you straight away.
Part details
- Engine: 2.4L
- Reinforcement: 3 ply
- Material: Silicone
- Finish: Red
- Category: Hose Kits
- Price: $134.66 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
HPS red high temperature 3-ply reinforced silicone hose kit is designed to replace stock OEM rubber lower and upper radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicone radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split coolant hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded.
So maintain your cooling system by replacing the old brittle hoses now before it’s too late. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS silicone hose kit is much easier to work with.
HPS silicone coolant hose kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Each kit includes HPS 100% stainless steel embossed hose clamps which will not cut through the hoses. Remark: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
- Material: 3-Ply Reinforced Silicone
- Color: Red
- Replace stock OEM or aftermarket rubber radiator coolant hoses. Made with correct bends and curves to ensure a perfect fitment.
- Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed rubber hoses.
- Made of premium grade high-heat resistance 3-ply reinforced silicone hoses.
- Long lasting quality and engineered for extremely high temperature service and prolonged exposure to under-hood and coolant heat.
- Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through the hoses.
Application:
For 2002-2006 Toyota Carmy 2.4L
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Radiator Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-1887-RED, 16571-28080, 16572-28080, 57-1887
If your vehicle has been modified, tell us, since the factory data will not show a previous owner changes.
Explore more: Hoses & Fittings · HPS Black Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Red Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · full catalog
Parcels leave our USA warehouse promptly and arrive protected, because packaging failures are returns waiting to happen.
When you want a second opinion that is not a parts store, read the fuel economy maintenance guidance.
Quick answers
How do I know this is the right part?
Our parts team confirms fitment before the box is sealed. Contact us with your vehicle details and we will settle it in advance.
How fast does this ship?
Most orders dispatch within one business day. You receive tracking by email the moment the parcel is handed to the carrier.
What happens if it arrives damaged?
Parts are covered against defects for the period stated on this page, and non defect returns follow our standard returns window.
How do you protect it in transit?
We verify diameter and reinforcement specification on every hose order.
![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-12] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_635e984b-3fc3-4cc7-aaac-b24669ef133f-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M22 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_84a0bab4-582d-4dc1-a176-6237879f811f-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 3/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_a94183bf-0c19-4e60-a94a-8eee322012ab-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-8 to M14 x 1.25] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_2d43096e-0176-48a6-aafa-d4ad5b2e739f-300x300.jpg)
Reviews
There are no reviews yet.