Need the HPS Blue Silicone Heater Hose Coolant Kit For Subaru 10-14 Outback 2.5L 3.6L (BR)/10-14 Legacy 2.5L 2.5T 3.6L (BM)? We hold inventory, check every order and dispatch the same business day.
Hoses and fittings work under pressure and heat, where material choice decides service life. Replace both the upper and lower runs while the system is open.
If your build is unusual, tell us and we will confirm the hps blue silicone heater hose coolant against it.
The hps blue silicone heater hose coolant ships protected, because a damaged part helps nobody.
Drivers choose the hps blue silicone heater hose coolant here for honest specification detail and quick dispatch.
Buyers comparing the hps blue silicone heater hose coolant will find the specification detail on this page rather than in a catalog footnote.
Every hps blue silicone heater hose coolant order goes through the same fitment review.
Ordering the hps blue silicone heater hose coolant takes a minute and the confirmation reaches you straight away.
Key details
- Engine: 2.5L
- Material: Silicone
- Finish: Blue
- Category: Hose Kits
- Price: $134.66 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS High Temp 3-ply Reinforced Silicone Heater Coolant Hose Kit is designed to replace stock OEM rubber heater hoses which weaken and fail over time. With premium quality silicone and race inspired design, this coolant hose kit can withstand the harsh, high temperature and high pressure operating conditions under the hood through a wide range of driving conditions.
HPS silicone hose kits have all the correct bends and dimensions to perfectly fit as replacements for OEM rubber coolant hoses. Compared to the universal hoses from the local auto store, HPS silicone hose kits are much easier to work with. Maximum temperature rating: 350 degrees Fahrenheit. 100% stainless steel clamps are included for easy installation.
- Material: 3-Ply Reinforced Silicone
- Color: Blue
- Ideal replacement and durable upgrade for OEM rubber heater hoses which weaken and fail over time.
- Withstands harsh high temperature and high pressure operating conditions that range from daily driving to competition off-roading. Max. temperature rating: 350F (177C).
- Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through silicone hoses.
- Engineered to ensure long lasting quality over stock rubber hoses.
- Compatible with OEM part numbers 72421AJ070, 72411AJ060.
Application:
For 2010-2014 Subaru Outback 2.5L 3.6L (BR 5th Gen)
For 2010-2014 Subaru Legacy 2.5L 2.5T 3.6L (BM 5th Gen)
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Heater Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-2146-BLUE, 72421AJ070, 72411AJ060, 57-2146
Message us the vehicle details and we will confirm compatibility, including anything unusual about your build.
More in this department: Hoses & Fittings · HPS Red Silicone Heater Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Blue Silicone Heater Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog
Orders are checked against your vehicle details before they are sealed, then dispatched quickly.
General guidance on this system is published in the Car Care Council maintenance tips.
Before you order
Can you check fitment before I order?
Trim level, engine option and drive type decide most fitment questions. Send those three details or the VIN and we will check them for you.
What are the shipping times?
Most orders dispatch within one business day. You receive tracking by email the moment the parcel is handed to the carrier.
How do returns work here?
Contact support before removing or returning anything, so the right process starts on the first message and nothing is voided by accident.
Is the part inspected before dispatch?
We verify diameter and reinforcement specification on every hose order.

![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 3/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_a94183bf-0c19-4e60-a94a-8eee322012ab-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 1/2 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_b76d947d-1e43-4e38-b986-a8f6682cdca6-300x300.jpg)
![HPS AN 3-Way Tee Adapter (Tee with female on run) Fitting [Tee] [AN -8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN9261_1_be005c51-8bd2-46a9-92b6-7e329201ec21-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M22 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_84a0bab4-582d-4dc1-a176-6237879f811f-300x300.jpg)
Reviews
There are no reviews yet.