The HPS Blue Reinforced Silicone Radiator Hose Kit For 84-89 Nissan 300ZX Turbo/NA is ready to ship today, with the paperwork and specs that back it up.

Reinforcement ply count determines burst strength, which matters most on boosted applications. Keep petroleum away from standard silicone unless the hose is lined for it.
If your build is unusual, tell us and we will confirm the hps blue reinforced silicone radiator against it.
The hps blue reinforced silicone radiator ships protected, because a damaged part helps nobody.
Drivers choose the hps blue reinforced silicone radiator here for honest specification detail and quick dispatch.
Buyers comparing the hps blue reinforced silicone radiator will find the specification detail on this page rather than in a catalog footnote.
Every hps blue reinforced silicone radiator order goes through the same fitment review.
Ordering the hps blue reinforced silicone radiator takes a minute and the confirmation reaches you straight away.
At a glance
- Material: Silicone
- Finish: Blue
- Category: Hose Kits
- Price: $203.92 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
HPS blue high temp 3-ply reinforced silicone Radiator hose kit (part number 57-1847-BLUE) replaces 1984-1989 Nissan 300ZX 3.0L V6 Turbo / NA stock OEM rubber Radiator coolant hoses with high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F).
Key Features
, The premium grade high-heat resistance reinforced silicone hoses are made with correct bends and curves to ensure a perfect fitment.
, Includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses.
, Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM upper and lower coolant hoses.
Compatible with OEM part numbers 19502-P5M-000, 19501-P5M-000
, Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat.
, HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty.
- Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant Radiator hoses.
- Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat.
- Includes 100 percent stainless steel industrial grade embossed hose clamps which would not cut through the silicone hoses.
- HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty.
Application:
For 1984-1989 Nissan 300ZX 3.0L V6 Turbo & Naturally Aspirated
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Heater Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-1847-BLUE, 57-1847, 571847BLUE
When two options look similar, our parts team will tell you which one your vehicle actually takes.
More in this department: Hoses & Fittings · HPS Blue Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · HPS Black Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · full catalog
Orders are checked against your vehicle details before they are sealed, then dispatched quickly.
For safety and service guidance from outside the aftermarket, see the NHTSA vehicle safety hub.
Quick answers
Can you check fitment before I order?
Our parts team confirms fitment before the box is sealed. Contact us with your vehicle details and we will settle it in advance.
When will my order dispatch?
Same business day dispatch applies to orders placed before the early afternoon cutoff, with tracking that updates at every carrier scan.
What if it does not fit?
Contact support before removing or returning anything, so the right process starts on the first message and nothing is voided by accident.
What happens before my order ships?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.
![HPS NPT Hex Plug Fitting [1/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN933_1-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 1/2 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_b76d947d-1e43-4e38-b986-a8f6682cdca6-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 1/4 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_8fbe7cf9-52b7-41cb-9b7c-e7396fcd09ae-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M16 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_b0b8871f-2b21-4f3d-9270-e611d31355a7-300x300.jpg)
Reviews
There are no reviews yet.