Buying the HPS Blue Intake Hose Kit + Drop In Panel Air Filter For 16-23 Toyota Tacoma 3.5L V6 (N300) Installed with TRD airbox should be simple, so here are the facts without the marketing noise.

Silicone tolerates far more heat than standard rubber and stays flexible for many years. Measure inner diameter at the fitting rather than estimating by eye.
Every hps blue intake hose kit order goes through the same fitment review.
Ordering the hps blue intake hose kit takes a minute and the confirmation reaches you straight away.
Our team knows the hps blue intake hose kit well, so ask if anything about the specification is unclear.
Stock of the hps blue intake hose kit is live on this page rather than estimated.
Shops order the hps blue intake hose kit from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the hps blue intake hose kit against it.
At a glance
- Engine: 3.5L V6
- Finish: Blue
- Category: Hose Kits
- Price: $283.49 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS Performance Air Intake Kit replaces the air intake hose from the TRD Performance Air Intake System with high-heat resistant materials that meet or exceeds OE specifications for a maximum temperature rating of 350 degrees Fahrenheit. It includes an HPS Performance Air Filter for improved air flow and filtration that is also washable and reusable. By replacing the TRD intake tube with the HPS silicone air intake kit, dyno testing shows increased performance output of 11.8 horsepower and 15.5 lb-ft.
of torque at 4000rpm. Acceleration is greatly improved over the standard TRD parts. This intake kit is an upgrade to the TRD Performance Air Intake System and retains the use of the TRD air filter housing, keeping the installation simple. This kit includes HPS 100% stainless steel embossed hose clamps that are fit for harshest conditions. No modifications are required to install this kit. RREMARK: ONLY fits Toyota Tacoma with a TRD Performance Upper Airbox.
- Material: 4-Ply Reinforced Silicone
- Color: Blue
- Powerful upgrade to the Toyota TRD Performance Air Intake and TRD Performance Filter that adds 11.8 horsepower and 15.5 lb-ft. of torque for faster acceleration and better throttle response.
- Intensifies induction sound during acceleration.
- Minimizes heat soak to maintain peak performance under any driving condition.
- Includes HPS Performance Drop In Panel Air Filter and HPS 100% stainless steel embossed hose clamps.
- Replaces OEM PN: PTR03-35160-AB, PTR03-35160-AC, PTR03-35160-AD, PTR03-34140.
Application:
For 2016-2023 Toyota Tacoma 3.5L V6 (N300 3rd Gen) equipped with TRD airbox ONLY
Remark:
Installation: Install on TRD Performance Upper Airbox
Product Content:
- 1 Set x Silicone Air Intake Kit
1 x Drop-In Panel Air Filter
Hardware if Any is Shwon in the Picture Above
Included instruction (Online Version) with pictures/description to guide the installer throughout the whole process.
Cross Reference Number:
- 827-723BL, PTR03-35160-AB, PTR03-35160-AC, PTR03-35160-AD, PTR03-34140, 57-2126-BLUE, HPS-457290
We would rather answer a question before you buy than process a return afterward, so ask freely.
Continue browsing: Hoses & Fittings · HPS Red Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Blue Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog
You get honest delivery estimates rather than optimistic ones, quoted live for your address.
For safety and service guidance from outside the aftermarket, see the Car Care Council maintenance tips.
Quick answers
Is fitment guaranteed on this listing?
We verify every doubtful order by hand. Give us the year, make, model and engine option and we will confirm compatibility in one reply.
What are the shipping times?
Your tracking link arrives by email at label creation and stays live until delivery, so you can follow the parcel the whole way.
What is the return policy?
If the part does not fit, message our support desk with the order number and we will arrange an exchange or refund. Keep the packaging until the test fit is done.
How do you verify this part?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.
![HPS AN 3-Way Tee Adapter (Tee with female on run) Fitting [Tee] [AN -8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN9261_1_be005c51-8bd2-46a9-92b6-7e329201ec21-300x300.jpg)
![HPS NPT Hex Plug Fitting [1/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN933_1-300x300.jpg)
![HPS NPT Allen Plug Fitting [3/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN932_1_6be249de-b49f-4373-8667-06e8edb296af-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M14 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_ef8cf05a-8f9b-4a44-938e-d86cae0e4307-300x300.jpg)
Reviews
There are no reviews yet.