The HPS Blue 3-Ply Reinforced Silicone Breather Hose Kit For 95-98 Nissan Skyline GTR RB26DETT Twin Turbo (R33) is in stock at PartSmith Co. and ready for dispatch from our USA warehouse.

Clamp choice matters: constant tension or lined clamps protect the hose surface over heat cycles. Measure inner diameter at the fitting rather than estimating by eye.
Every hps blue 3-ply reinforced silicone order goes through the same fitment review.
Ordering the hps blue 3-ply reinforced silicone takes a minute and the confirmation reaches you straight away.
Our team knows the hps blue 3-ply reinforced silicone well, so ask if anything about the specification is unclear.
Stock of the hps blue 3-ply reinforced silicone is live on this page rather than estimated.
Shops order the hps blue 3-ply reinforced silicone from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the hps blue 3-ply reinforced silicone against it.
Part details
- Reinforcement: 3 ply
- Material: Silicone
- Finish: Blue
- Category: Hose Kits
- Price: $150.48 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS High Temp 3-Ply Reinforced Silicone Breather Hose Kit replaces the R33 Nissan Skyline GTR’s old stock OEM breather hoses with premium quality silicone lined with an oil-resistant fluoroliner material and 3-ply polyester reinforcement. This kit can withstand high pressure and high temperature conditions under the hood through a wide range of driving conditions. Protect your investment and mitigate poor engine performance caused by cracked, damaged, and ruptured hoses. This HPS silicone hose kit is designed using OEM parts to ensure a perfect fit. Maximum temperature rating: 350 degrees Fahrenheit. Heavy duty stainless steel embossed hose clamps are included for easy installation.
- Material: 3-Ply Reinforced Silicone
- Color: Blue
- Ideal replacement or performance upgrade for hard-to-find or discontinued stock JDM OEM rubber crankcase breather hoses.
- Withstands harsh high temperature and high pressure operating conditions while maintaining peak performance during competition or daily driving. Max. temperature rating: 350F (177C).
- Includes HPS 100% stainless steel embossed hose clamps.
- Race proven design featuring oil-resistant fluorolined silicone ensures long lasting durability over the stock rubber hoses.
- Prevents and fixes leaks that lead to poor engine performance caused by cracked, damaged, and ruptured rubber hoses.
- Replaces OEM PN: 11826-24U00, 11826-05U16, 11823-05U06.
Application:
For 1995-1998 Nissan Skyline GTR RB26DETT Twin Turbo (R33)
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Breather Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-2100-BLUE, 57-2100, 11826-24U00, 11826-05U16, 11823-05U06
Shops ordering in volume can send a full parts list and we will verify the whole job in one reply.
Keep shopping: Hoses & Fittings · HPS Black Ancillary Hose Kit (Bypass Coolant Hose) For 01-05 Mazda Miata 1.8L Non Turbo (NB2) · HPS Red Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog
We pack for the worst day the carrier can have, which keeps our damage rate low.
Further reading from a neutral source: the fuel economy maintenance guidance.
Before you order
How do I confirm this fits?
Our parts team confirms fitment before the box is sealed. Contact us with your vehicle details and we will settle it in advance.
What are the shipping times?
Your tracking link arrives by email at label creation and stays live until delivery, so you can follow the parcel the whole way.
What if it does not fit?
A straightforward returns window applies from delivery. Keep the original packaging until you have test fitted the part and contact support for a fast exchange or refund.
How do you protect it in transit?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.

![HPS NPT Hex Plug Fitting [1/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN933_1-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M20 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_9ea8f01c-f6ee-43ae-9912-654e10e73c03-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M22 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_84a0bab4-582d-4dc1-a176-6237879f811f-300x300.jpg)
Reviews
There are no reviews yet.