The HPS Blue 3-Ply Reinforced Silicone Radiator Hose Kit For 02-06 Toyota Carmy 2.4L sits in the Hoses & Fittings department here, stocked and fitment checked.
Hoses and fittings work under pressure and heat, where material choice decides service life. Use constant tension or lined clamps so the hose surface survives heat cycles.
Buyers comparing the hps blue 3-ply reinforced silicone will find the specification detail on this page rather than in a catalog footnote.
The hps blue 3-ply reinforced silicone listed here is checked against your vehicle before dispatch.
Every hps blue 3-ply reinforced silicone order goes through the same fitment review.
Ordering the hps blue 3-ply reinforced silicone takes a minute and the confirmation reaches you straight away.
Our team knows the hps blue 3-ply reinforced silicone well, so ask if anything about the specification is unclear.
Stock of the hps blue 3-ply reinforced silicone is live on this page rather than estimated.
Shops order the hps blue 3-ply reinforced silicone from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the hps blue 3-ply reinforced silicone against it.
Quick specs
- Engine: 2.4L
- Reinforcement: 3 ply
- Material: Silicone
- Finish: Blue
- Category: Hose Kits
- Price: $134.66 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
HPS blue high temperature 3-ply reinforced silicone hose kit is designed to replace stock OEM rubber lower and upper radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicone radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split coolant hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded.
So maintain your cooling system by replacing the old brittle hoses now before it’s too late. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS silicone hose kit is much easier to work with.
HPS silicone coolant hose kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Each kit includes HPS 100% stainless steel embossed hose clamps which will not cut through the hoses. Remark: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
- Material: 3-Ply Reinforced Silicone
- Color: Blue
- Replace stock OEM or aftermarket rubber radiator coolant hoses. Made with correct bends and curves to ensure a perfect fitment.
- Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed rubber hoses.
- Made of premium grade high-heat resistance 3-ply reinforced silicone hoses.
- Long lasting quality and engineered for extremely high temperature service and prolonged exposure to under-hood and coolant heat.
- Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through the hoses.
Application:
For 2002-2006 Toyota Carmy 2.4L
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Radiator Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-1887-BLUE, 16571-28080, 16572-28080, 57-1887
Our fitment desk exists precisely for the listings where the specification is easy to misread.
See also: Hoses & Fittings · HPS Red Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Blue Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog
Dispatch is quick because the inventory is real, and you receive tracking the moment the label prints.
Before you start the job, the NHTSA vehicle safety hub is worth five minutes.
Common questions
How do I confirm this fits?
Trim level, engine option and drive type decide most fitment questions. Send those three details or the VIN and we will check them for you.
Do you ship the same day?
Your tracking link arrives by email at label creation and stays live until delivery, so you can follow the parcel the whole way.
How do returns work here?
Report any transit damage with a photo and we will send a replacement or refund you. We handle the carrier claim ourselves.
Is this checked before shipping?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.

![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_b7ae2165-4f89-472c-a9fc-72ba3e09b875-300x300.jpg)
![HPS NPT Allen Plug Fitting [1/2 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN932_1_905b27b0-3c7d-4fa0-ad9c-55f954a9d8c0-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 3/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_a94183bf-0c19-4e60-a94a-8eee322012ab-300x300.jpg)
![HPS AN 3-Way Tee Adapter (Tee with female on run) Fitting [Tee] [AN -8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN9261_1_be005c51-8bd2-46a9-92b6-7e329201ec21-300x300.jpg)
Reviews
There are no reviews yet.