The HPS Red Silicone w/Coil Insert Radiator Hose Coolant Kit For 99-04 Jeep Grand Cherokee 4.0L I6 (WJ) sits in the Hoses & Fittings department here, stocked and fitment checked.
Petroleum contact requires the correct lining, so fuel and oil routing needs the right specification. Re check clamp torque after the first few heat cycles.
The coil insert radiator hose coolant listed here is checked against your vehicle before dispatch.
Every coil insert radiator hose coolant order goes through the same fitment review.
Ordering the coil insert radiator hose coolant takes a minute and the confirmation reaches you straight away.
Our team knows the coil insert radiator hose coolant well, so ask if anything about the specification is unclear.
Stock of the coil insert radiator hose coolant is live on this page rather than estimated.
Shops order the coil insert radiator hose coolant from us in volume because the data on the page is accurate.
Part details
- Engine: 4.0L I6
- Material: Silicone
- Finish: Red
- Category: Hose Kits
- Price: $161.60 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS High Temp 3-ply Reinforced Silicone Radiator Coolant Hose Kit is designed to replace stock OEM rubber upper and lower radiator hoses which weaken and fail over time. With premium quality silicone and performance inspired design, this coolant hose kit can withstand the harsh, high temperature and high pressure operating conditions under the hood through a wide range of driving conditions. The lower radiator hose features a stainless steel coil insert to prevent collapsing from negative pressure, a common issue for these vehicles.
HPS silicone hose kits have all the correct bends and dimensions to perfectly fit as replacements for OEM rubber coolant hoses. Compared to the universal hoses from the local auto store, HPS silicone hose kits are much easier to work with. Maximum temperature rating: 350 degrees Fahrenheit. 100% stainless steel embossed hose clamps are included for easy installation.
- Material: 3-Ply Reinforced Silicone / Stainless Steel Coil Insert
- Color: Red
- Ideal replacement and durable upgrade for OEM rubber upper and lower radiator hoses which weaken and fail over time.
- Withstands harsh high temperature and high pressure operating conditions that range from daily driving to competition off-roading. Max. temperature rating: 350F (177C).
- Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through silicone hoses.
- Lower radiator hose features a stainless steel coil insert to prevent collapse under negative pressure.
- Compatible with OEM part numbers 52079401AB, 52079406AC.
Application:
For 1999-2004 Jeep Grand Cherokee 4.0L I6 (WJ)
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Radiator Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-2129-RED, 52079401AB, 52079406AC, 57-2129
Our fitment desk exists precisely for the listings where the specification is easy to misread.
Continue browsing: Hoses & Fittings · HPS Red Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · HPS Blue Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · full catalog
Stock levels shown here are live, so what you order is what is on the shelf ready to travel.
When you want a second opinion that is not a parts store, read the Car Care Council maintenance tips.
Quick answers
Can you check fitment before I order?
Trim level, engine option and drive type decide most fitment questions. Send those three details or the VIN and we will check them for you.
When will my order dispatch?
We ship from a USA warehouse with quick dispatch, and delivery estimates appear at checkout once you enter your address.
What if it does not fit?
A straightforward returns window applies from delivery. Keep the original packaging until you have test fitted the part and contact support for a fast exchange or refund.
How do you protect it in transit?
We verify diameter and reinforcement specification on every hose order.
![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-10] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_2ac48160-6f50-4c53-8c37-0cf776a30fac-300x300.jpg)
![HPS AN 3-Way Tee Adapter (Tee with female on run) Fitting [Tee] [AN -8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN9261_1_be005c51-8bd2-46a9-92b6-7e329201ec21-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-8 to M14 x 1.25] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_2d43096e-0176-48a6-aafa-d4ad5b2e739f-300x300.jpg)
Reviews
There are no reviews yet.