PartSmith Co. supplies the HPS 1-1/2″ (38mm) ID, 1-3/4″ Long Blue Silicone Reinforced Coolant Cap w/Clamp for Bypass Heater Vacuum Valve Water Port to drivers, shops and fleets across the USA.

Reinforcement ply count determines burst strength, which matters most on boosted applications. Measure inner diameter at the fitting rather than estimating by eye.
The clamp for bypass heater vacuum ships protected, because a damaged part helps nobody.
Drivers choose the clamp for bypass heater vacuum here for honest specification detail and quick dispatch.
Buyers comparing the clamp for bypass heater vacuum will find the specification detail on this page rather than in a catalog footnote.
The clamp for bypass heater vacuum listed here is checked against your vehicle before dispatch.
Every clamp for bypass heater vacuum order goes through the same fitment review.
Ordering the clamp for bypass heater vacuum takes a minute and the confirmation reaches you straight away.
Our team knows the clamp for bypass heater vacuum well, so ask if anything about the specification is unclear.
At a glance
- Material: Silicone
- Finish: Blue
- Category: Universal Hose
- Price: $33.55 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
The HPS Performance 1-1/2″ (38mm) high temperature reinforced Blue silicone cap is designed specifically to be installed on your cooling system. Vacuum caps have no reinforcement and are intended for vacuum and very little pressure. The HPS reinforced silicone caps are manufactured just like our reinforced silicone radiator hoses. While traditional rubber coolant cap might crack and cause coolant leak, HPS Performance high temperature 3-ply polyester reinforced silicone caps will withstand the high temperatures and pressures of your cooling system for years to come.
HPS Reinforced Silicone Caps are compatible for use with coolant, water, air, turbocharger bypass valve ports, vacuum ports, throttle body water ports, heater cores, and much more.
Technical Specification
Product Type: Reinforced Silicone Coolant Cap
HPS Part Number: RSCC-150-BLUE
Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C)
Reinforced Layer: 3-ply Polyester
Inside Diameter: 1-1/2″ (38mm)
Color: Blue
Wall Thickness: 4mm
Inside Length: 1-3/16″
Overall Length: 1-3/4″
UV and ozone resistant
Remark: HPS reinforced silicone caps are not compatible with fuel, oil, or any petroleum-based products.
- Material: 3-Ply Reinforced Polyester Silicone
- Color: Blue
- Made of High Temperature 3-ply Polyester Reinforced Silicone. Maximum Temperature Rating: 350 deg. F (177 deg. C).
- Ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications
- Compatible for use with coolant, water, air, turbocharger bypass valve ports, vacuum ports, throttle body water ports, heater cores, and much more.
- Inside Diameter: 1-1/2″ (38mm). Overall Length: 1-3/4″
- HPS reinforced silicone caps are not compatible with fuel, oil, or any petroleum-based products.
Come with a HPS Brand Stainless Steel clamp (match Size) to complete your project
Application:
HPS Reinforced Silicone Caps are Universal Fit that compatible for use with coolant, water, air, turbocharger bypass valve ports, vacuum ports, throttle body water ports, heater cores, and much more.
Remark:
Installation: Compatible with Water/Coolant ONLY, Not for Fuel/Oil
Product Content:
- 1 x Coolant Cap
1 x Clamp
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- RSCC-150-BLUE, EMSC-40-60, RSCC150BLUE, EMSC4060, 648044907567, 648044825656
Unsure about the specification? Our desk cross references against manufacturer data at no cost.
More in this department: Hoses & Fittings · HPS 2.38″, 2.75″ (60mm, 70mm) ID, 6″ Leg Long Black 4-Ply Silicone 1/2″ Offset Reducer Hose · HPS 2.25″, 2.5″ (57mm, 63mm) ID, 6″ Leg Long Black 4-Ply Silicone 1/2″ Offset Reducer Hose · full catalog
Stock levels shown here are live, so what you order is what is on the shelf ready to travel.
For neutral background on this kind of maintenance, see the NHTSA vehicle safety hub.
Common questions
Will this part fit my vehicle?
We verify every doubtful order by hand. Give us the year, make, model and engine option and we will confirm compatibility in one reply.
Do you ship the same day?
Your tracking link arrives by email at label creation and stays live until delivery, so you can follow the parcel the whole way.
How do returns work here?
A straightforward returns window applies from delivery. Keep the original packaging until you have test fitted the part and contact support for a fast exchange or refund.
Is the part inspected before dispatch?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.
![HPS NPT Allen Plug Fitting [1/2 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN932_1_905b27b0-3c7d-4fa0-ad9c-55f954a9d8c0-300x300.jpg)

![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 1/4 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_8fbe7cf9-52b7-41cb-9b7c-e7396fcd09ae-300x300.jpg)
![HPS AN 3-Way Tee Adapter (Tee with female on run) Fitting [Tee] [AN -6] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN9261_1_13ceb207-d699-42c1-9a48-035b83f670cc-300x300.jpg)
Reviews
There are no reviews yet.