Buying the Smoked Lens/Chrome LED Rear 3RD Third Brake Light Lamp For 14-20 Silverado/Sierra should be simple, so here are the facts without the marketing noise.
Clean grounds and tight terminals prevent a surprising share of electrical faults blamed on components. Load test the battery when replacing charging components.
The chrome led rear 3rd third brake listed here is checked against your vehicle before dispatch.
Every chrome led rear 3rd third brake order goes through the same fitment review.
Ordering the chrome led rear 3rd third brake takes a minute and the confirmation reaches you straight away.
Our team knows the chrome led rear 3rd third brake well, so ask if anything about the specification is unclear.
Stock of the chrome led rear 3rd third brake is live on this page rather than estimated.
Shops order the chrome led rear 3rd third brake from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the chrome led rear 3rd third brake against it.
The chrome led rear 3rd third brake ships protected, because a damaged part helps nobody.
Drivers choose the chrome led rear 3rd third brake here for honest specification detail and quick dispatch.
What you are buying
- Material: Chrome
- Finish: Smoked
- Position: Rear
- Category: Electrical & Lighting
- Price: $83.22 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
LED third brake light is a quick and simple way to upgrade the look of your pickup truck. When turned on, the bright LEDs (Light Emitting Diodes) shine up to ten times brighter than standard light bulbs. Even when the brake is not depressed, the integrated cargo light (if equipped) gives off plenty of white light to view your gear in the truck bed. The LED third brake light has a durable polycarbonate lens with a free form reflector and is available in Clear or custom Smoked.
- Material: ABS Plastic/Polycarbonate Lens
- Type: Third Brake Light
- Style: Brake & Cargo Light
- Bulb Type: LED
- Voltage: 12V Operation
- Housing Color: Chrome
- Lens Color: Smoked
- Light Color: Red/White
- Low power consumption, plug-and-play operation
- In comparison to OEM lighting, super LED lighting
- It gives the vehicle a unique appearance that is ideal for show use.
- No alterations or drilling are required, may require reuses OEM Hardware
- Uses Existing Bolt Holes & Plug for Installation
- Recommended to use hand screwdriver tool for the installation. Electronic tool can easily screwing too tight and crack the case.
Application:
For 2014-2018 Chevrolet Silverado 1500
For 2019-2022 Chevrolet Silverado 1500 (Standard Cab ONLY)
For 2015-2018 Chevrolet Silverado 2500
For 2015-2019 Chevrolet Silverado 2500 HD
For 2020-2022 Chevrolet Silverado 2500 HD (Standard Cab ONLY)
For 2015-2019 Chevrolet Silverado 3500 HD
For 2020-2022 Chevrolet Silverado 3500 HD (Standard Cab ONLY)
For 2019 Chevrolet Silverado 1500 LD
For 2014-2018 GMC Sierra 1500
For 2019-2022 GMC Sierra 1500 (Standard Cab ONLY)
For 2015-2019 GMC Sierra 2500 HD
For 2020-2022 GMC Sierra 2500 HD (Standard Cab ONLY)
For 2015-2019 GMC Sierra 3500 HD
For 2020-2022 GMC Sierra 3500 HD (Standard Cab ONLY)
For 2019 & 2022 GMC Sierra 1500 Limited
Remark:
Installation: The smoke lens will reduce light bulb brightness about 30%.
Product Content:
- 1 x Third Brake Light
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- BFC-3BRLED-MULT6-C3G3-SM, 23509162/20979071, 23509162, 20979071
Cargo Light Function Note:
Should your vehicle is NOT equipped with a Cargo Light function but you still
wish to install?
You may experience the Cargo Light staying on ALL THE TIME. If you do experience
this issue, there are two modifications that may be performed
1. Disable the Cargo Light Function. This can be done by cutting the white 12v
Cargo Light power wire. If this is method is chosen it is recommended to cover
the wire end with heat shrink tube, wire nuts or electrical tape.
2. Add a switch and run a 12v power wire from your dash to the LED Brake Light.
This is will also require cutting the white 12v Cargo Light power wire. Again
please cover the plug side of the led wire to prevent electrical issues.
Prior to installation please verify the following:
1. Inspect back circuit board and wire connections
2. Verify circuit board is protected from exposed metal and wires when installing in the vehicle
3. Make sure the following wires are going to their correct locations.
- Black = Ground
- Red = Brake Light (+12v)
- White = Reverse Light (+12v)
- Yellow = Auxiliary or Running Light (+12v)
If the application text leaves any doubt, message us with the VIN and we will rule on fitment before the box is sealed.
Explore more: Electrical & Lighting · SKF Drive End Alternator Bearing for 1983-1988 GMC G2500 · SKF Drive End Alternator Bearing for 1983-1988 GMC G3500 · full catalog
Our warehouse team packs the way they would want their own parts to arrive.
For neutral background on this kind of maintenance, see the fuel economy maintenance guidance.
Before you order
What do you need to verify fitment?
Trim level, engine option and drive type decide most fitment questions. Send those three details or the VIN and we will check them for you.
How quickly can I get this?
Orders placed before early afternoon on a business day usually leave our USA warehouse the same day, and tracking is emailed when the label is created.
Is there a warranty on this?
A straightforward returns window applies from delivery. Keep the original packaging until you have test fitted the part and contact support for a fast exchange or refund.
How do you verify this part?
Electrical parts are verified for connector type and voltage before dispatch.
Reviews
There are no reviews yet.