PartSmith Co. keeps the Red Lens/Chrome LED Rear 3RD Third Brake Light Lamp For 14-20 Silverado/Sierra in stock so your repair is not waiting on a supplier.
Lighting output means little without the correct beam pattern, which is decided by the housing and optics. Check the connector shape against your vehicle rather than trusting a photo.
Drivers choose the chrome led rear 3rd third brake here for honest specification detail and quick dispatch.
Buyers comparing the chrome led rear 3rd third brake will find the specification detail on this page rather than in a catalog footnote.
The chrome led rear 3rd third brake listed here is checked against your vehicle before dispatch.
Every chrome led rear 3rd third brake order goes through the same fitment review.
Ordering the chrome led rear 3rd third brake takes a minute and the confirmation reaches you straight away.
Our team knows the chrome led rear 3rd third brake well, so ask if anything about the specification is unclear.
Stock of the chrome led rear 3rd third brake is live on this page rather than estimated.
Shops order the chrome led rear 3rd third brake from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the chrome led rear 3rd third brake against it.
The important numbers
- Material: Chrome
- Finish: Red
- Position: Rear
- Category: Electrical & Lighting
- Price: $82.70 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
LED third brake light is a quick and simple way to upgrade the look of your pickup truck. When turned on, the bright LEDs (Light Emitting Diodes) shine up to ten times brighter than standard light bulbs. Even when the brake is not depressed, the integrated cargo light (if equipped) gives off plenty of white light to view your gear in the truck bed. The LED third brake light has a durable polycarbonate lens with a free form reflector and is available in Clear or custom Smoked.
- Material: ABS Plastic/Polycarbonate Lens
- Type: Third Brake Light
- Style: Brake & Cargo Light
- Bulb Type: LED
- Voltage: 12V Operation
- Housing Color: Chrome
- Lens Color: Red
- Light Color: Red/White
- Low power consumption, plug-and-play operation
- In comparison to OEM lighting, super LED lighting
- It gives the vehicle a unique appearance that is ideal for show use.
- No alterations or drilling are required, may require reuses OEM Hardware
- Uses Existing Bolt Holes & Plug for Installation
- Recommended to use hand screwdriver tool for the installation. Electronic tool can easily screwing too tight and crack the case.
Application:
For 2014-2018 Chevrolet Silverado 1500
For 2019-2022 Chevrolet Silverado 1500 (Standard Cab ONLY)
For 2015-2018 Chevrolet Silverado 2500
For 2015-2019 Chevrolet Silverado 2500 HD
For 2020-2022 Chevrolet Silverado 2500 HD (Standard Cab ONLY)
For 2015-2019 Chevrolet Silverado 3500 HD
For 2020-2022 Chevrolet Silverado 3500 HD (Standard Cab ONLY)
For 2019 Chevrolet Silverado 1500 LD
For 2014-2018 GMC Sierra 1500
For 2019-2022 GMC Sierra 1500 (Standard Cab ONLY)
For 2015-2019 GMC Sierra 2500 HD
For 2020-2022 GMC Sierra 2500 HD (Standard Cab ONLY)
For 2015-2019 GMC Sierra 3500 HD
For 2020-2022 GMC Sierra 3500 HD (Standard Cab ONLY)
For 2019 & 2022 GMC Sierra 1500 Limited
Remark:
Installation:
Product Content:
- 1 x Third Brake Light
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- BFC-3BRLED-MULT6-C3G3-RD, 23509162/20979071, 23509162, 20979071
Cargo Light Function Note:
Should your vehicle is NOT equipped with a Cargo Light function but you still
wish to install?
You may experience the Cargo Light staying on ALL THE TIME. If you do experience
this issue, there are two modifications that may be performed
1. Disable the Cargo Light Function. This can be done by cutting the white 12v
Cargo Light power wire. If this is method is chosen it is recommended to cover
the wire end with heat shrink tube, wire nuts or electrical tape.
2. Add a switch and run a 12v power wire from your dash to the LED Brake Light.
This is will also require cutting the white 12v Cargo Light power wire. Again
please cover the plug side of the led wire to prevent electrical issues.
Prior to installation please verify the following:
1. Inspect back circuit board and wire connections
2. Verify circuit board is protected from exposed metal and wires when installing in the vehicle
3. Make sure the following wires are going to their correct locations.
- Black = Ground
- Red = Brake Light (+12v)
- White = Reverse Light (+12v)
- Yellow = Auxiliary or Running Light (+12v)
If your vehicle has been modified, tell us, since the factory data will not show a previous owner changes.
Customers also open: Electrical & Lighting · AISIN Transfer Case Actuator for 2016-2020 Toyota Tacoma · SKF Drive End Alternator Bearing for 1983-1988 GMC G2500 · full catalog
Your order is picked, inspected and packed by a person, then handed to the carrier with tracking the same day.
When you want a second opinion that is not a parts store, read the fuel economy maintenance guidance.
Questions we get about this part
Can you check fitment before I order?
The application text on this page lists what the part serves. If your vehicle is not clearly covered, send the VIN and we will rule on it before you pay.
When will my order dispatch?
Same business day dispatch applies to orders placed before the early afternoon cutoff, with tracking that updates at every carrier scan.
What if it does not fit?
Parts are covered against defects for the period stated on this page, and non defect returns follow our standard returns window.
Is this checked before shipping?
Electrical parts are verified for connector type and voltage before dispatch.
Reviews
There are no reviews yet.