The Clear Lens/Black LED Rear 3RD Third Brake Light Lamp For 14-20 Silverado/Sierra is one of our steady sellers in Electrical & Lighting, and it ships from the USA.
Plug in fitment saves hours of splicing, which is why our listings state the connector configuration. Protect new circuits with correctly rated fusing.
Ordering the black led rear 3rd third brake light lamp takes a minute and the confirmation reaches you straight away.
Our team knows the black led rear 3rd third brake light lamp well, so ask if anything about the specification is unclear.
Stock of the black led rear 3rd third brake light lamp is live on this page rather than estimated.
Shops order the black led rear 3rd third brake light lamp from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the black led rear 3rd third brake light lamp against it.
The black led rear 3rd third brake light lamp ships protected, because a damaged part helps nobody.
Drivers choose the black led rear 3rd third brake light lamp here for honest specification detail and quick dispatch.
Buyers comparing the black led rear 3rd third brake light lamp will find the specification detail on this page rather than in a catalog footnote.
Every black led rear 3rd third brake light lamp order goes through the same fitment review.
At a glance
- Finish: Black
- Position: Rear
- Category: Electrical & Lighting
- Price: $81.25 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
LED third brake light is a quick and simple way to upgrade the look of your pickup truck. When turned on, the bright LEDs (Light Emitting Diodes) shine up to ten times brighter than standard light bulbs. Even when the brake is not depressed, the integrated cargo light (if equipped) gives off plenty of white light to view your gear in the truck bed. The LED third brake light has a durable polycarbonate lens with a free form reflector and is available in Clear or custom Smoked.
- Material: ABS Plastic/Polycarbonate Lens
- Type: Third Brake Light
- Style: Brake & Cargo Light
- Bulb Type: LED
- Voltage: 12V Operation
- Housing Color: Black
- Lens Color: Clear
- Light Color: Red/White
- Low power consumption, plug-and-play operation
- In comparison to OEM lighting, super LED lighting
- It gives the vehicle a unique appearance that is ideal for show use.
- No alterations or drilling are required, may require reuses OEM Hardware
- Uses Existing Bolt Holes & Plug for Installation
- Recommended to use hand screwdriver tool for the installation. Electronic tool can easily screwing too tight and crack the case.
Application:
For 2014-2018 Chevrolet Silverado 1500
For 2019-2022 Chevrolet Silverado 1500 (Standard Cab ONLY)
For 2015-2018 Chevrolet Silverado 2500
For 2015-2019 Chevrolet Silverado 2500 HD
For 2020-2022 Chevrolet Silverado 2500 HD (Standard Cab ONLY)
For 2015-2019 Chevrolet Silverado 3500 HD
For 2020-2022 Chevrolet Silverado 3500 HD (Standard Cab ONLY)
For 2019 Chevrolet Silverado 1500 LD
For 2014-2018 GMC Sierra 1500
For 2019-2022 GMC Sierra 1500 (Standard Cab ONLY)
For 2015-2019 GMC Sierra 2500 HD
For 2020-2022 GMC Sierra 2500 HD (Standard Cab ONLY)
For 2015-2019 GMC Sierra 3500 HD
For 2020-2022 GMC Sierra 3500 HD (Standard Cab ONLY)
For 2019 & 2022 GMC Sierra 1500 Limited
Remark:
Installation:
Product Content:
- 1 x Third Brake Light
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- BFC-3BRLED-MULT6-C3G3-BK, 23509162/20979071, 23509162, 20979071
Cargo Light Function Note:
Should your vehicle is NOT equipped with a Cargo Light function but you still
wish to install?
You may experience the Cargo Light staying on ALL THE TIME. If you do experience
this issue, there are two modifications that may be performed
1. Disable the Cargo Light Function. This can be done by cutting the white 12v
Cargo Light power wire. If this is method is chosen it is recommended to cover
the wire end with heat shrink tube, wire nuts or electrical tape.
2. Add a switch and run a 12v power wire from your dash to the LED Brake Light.
This is will also require cutting the white 12v Cargo Light power wire. Again
please cover the plug side of the led wire to prevent electrical issues.
Prior to installation please verify the following:
1. Inspect back circuit board and wire connections
2. Verify circuit board is protected from exposed metal and wires when installing in the vehicle
3. Make sure the following wires are going to their correct locations.
- Black = Ground
- Red = Brake Light (+12v)
- White = Reverse Light (+12v)
- Yellow = Auxiliary or Running Light (+12v)
Ask before you order and the only surprise on installation day is how smoothly it goes.
More in this department: Electrical & Lighting · AISIN Transfer Case Actuator for 2020 Toyota 4Runner · AISIN Transfer Case Actuator for 2011-2018 Toyota Sequoia · full catalog
You get honest delivery estimates rather than optimistic ones, quoted live for your address.
General guidance on this system is published in the fuel economy maintenance guidance.
Buyer questions
How do I know this is the right part?
Send your VIN or your year, make and model and our fitment desk confirms the part against manufacturer data before it ships. The check is free and usually answered the same business day.
What are the shipping times?
Same business day dispatch applies to orders placed before the early afternoon cutoff, with tracking that updates at every carrier scan.
What if it does not fit?
Parts are covered against defects for the period stated on this page, and non defect returns follow our standard returns window.
How do you verify this part?
Electrical parts are verified for connector type and voltage before dispatch.
Reviews
There are no reviews yet.