Order the Black Housing Smoked Lens LED Cargo+Third Brake Light For 14-20 Silverado/Sierra from a parts team that verifies fitment before anything leaves the building.
Plug in fitment saves hours of splicing, which is why our listings state the connector configuration. Protect new circuits with correctly rated fusing.
Stock of the black housing smoked lens led cargo is live on this page rather than estimated.
Shops order the black housing smoked lens led cargo from us in volume because the data on the page is accurate.
If your build is unusual, tell us and we will confirm the black housing smoked lens led cargo against it.
The black housing smoked lens led cargo ships protected, because a damaged part helps nobody.
Drivers choose the black housing smoked lens led cargo here for honest specification detail and quick dispatch.
Buyers comparing the black housing smoked lens led cargo will find the specification detail on this page rather than in a catalog footnote.
Every black housing smoked lens led cargo order goes through the same fitment review.
Ordering the black housing smoked lens led cargo takes a minute and the confirmation reaches you straight away.
Our team knows the black housing smoked lens led cargo well, so ask if anything about the specification is unclear.
Quick specs
- Finish: Black
- Category: Electrical & Lighting
- Price: $57.24 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
LED third brake light is a quick and simple way to upgrade the look of your pickup truck. When turned on, the bright LEDs (Light Emitting Diodes) shine up to ten times brighter than standard light bulbs. Even when the brake is not depressed, the integrated cargo light (if equipped) gives off plenty of white light to view your gear in the truck bed. The LED third brake light has a durable polycarbonate lens with a free form reflector and is available in Clear or custom Smoked.
- Material: ABS Plastic/Polycarbonate Lens
- Type: Third Brake Light
- Style: Brake & Cargo Light
- Bulb Type: LED
- Voltage: 12V Operation
- Housing Color: Black
- Lens Color: Smoked
- Light Color: Red/White
- Low power consumption, plug-and-play operation
- In comparison to OEM lighting, super LED lighting
- It gives the vehicle a unique appearance that is ideal for show use.
- No alterations or drilling are required, may require reuses OEM Hardware
- Uses Existing Bolt Holes & Plug for Installation
- Recommended to use hand screwdriver tool for the installation. Electronic tool can easily screwing too tight and crack the case.
Application:
For 2014-2018 Chevrolet Silverado 1500
For 2019-2022 Chevrolet Silverado 1500 (Standard Cab ONLY)
For 2015-2018 Chevrolet Silverado 2500
For 2015-2019 Chevrolet Silverado 2500 HD
For 2020-2022 Chevrolet Silverado 2500 HD (Standard Cab ONLY)
For 2015-2019 Chevrolet Silverado 3500 HD
For 2020-2022 Chevrolet Silverado 3500 HD (Standard Cab ONLY)
For 2019 Chevrolet Silverado 1500 LD
For 2014-2018 GMC Sierra 1500
For 2019-2022 GMC Sierra 1500 (Standard Cab ONLY)
For 2015-2019 GMC Sierra 2500 HD
For 2020-2022 GMC Sierra 2500 HD (Standard Cab ONLY)
For 2015-2019 GMC Sierra 3500 HD
For 2020-2022 GMC Sierra 3500 HD (Standard Cab ONLY)
For 2019 & 2022 GMC Sierra 1500 Limited
Remark:
Installation: The smoke lens will reduce light bulb brightness about 30%.
Product Content:
- 1 x Third Brake Light
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- BFC-3BRLED-CGL-MULT6-14C3G3-BK-SM, 23509162, 20979071, 23509162, 20979071
Cargo Light Function Note:
Should your vehicle is NOT equipped with a Cargo Light function but you still
wish to install?
You may experience the Cargo Light staying on ALL THE TIME. If you do experience
this issue, there are two modifications that may be performed
1. Disable the Cargo Light Function. This can be done by cutting the white 12v
Cargo Light power wire. If this is method is chosen it is recommended to cover
the wire end with heat shrink tube, wire nuts or electrical tape.
2. Add a switch and run a 12v power wire from your dash to the LED Brake Light.
This is will also require cutting the white 12v Cargo Light power wire. Again
please cover the plug side of the led wire to prevent electrical issues.
Prior to installation please verify the following:
1. Inspect back circuit board and wire connections
2. Verify circuit board is protected from exposed metal and wires when installing in the vehicle
3. Make sure the following wires are going to their correct locations.
- Black = Ground
- Red = Brake Light (+12v)
- White = Reverse Light (+12v)
- Yellow = Auxiliary or Running Light (+12v)
Every order gets a fitment review before dispatch, and anything doubtful gets a message rather than a shipment.
More in this department: Electrical & Lighting · AISIN Transfer Case Actuator for 2011-2017 Toyota Land Cruiser · AISIN Transfer Case Actuator for 2008-2011 Toyota Tundra · full catalog
We ship fast from our own shelves, and tracking reaches your inbox as soon as the carrier receives the parcel.
When you want a second opinion that is not a parts store, read the NHTSA vehicle safety hub.
Quick answers
Can you check fitment before I order?
Send your VIN or your year, make and model and our fitment desk confirms the part against manufacturer data before it ships. The check is free and usually answered the same business day.
How fast does this ship?
We ship from a USA warehouse with quick dispatch, and delivery estimates appear at checkout once you enter your address.
Is there a warranty on this?
Returns are handled in one reply for most cases. Keep your order confirmation, since it is the only proof of purchase we need.
How do you protect it in transit?
Electrical parts are verified for connector type and voltage before dispatch.
Reviews
There are no reviews yet.