HPS Red 3-Ply Silicone Radiator & Heater Hose Kit For 90-91 Toyota 4Runner 3.0L V6 Left Hand Drive

The HPS Red 3-Ply Silicone Radiator & Heater Hose Kit For 90-91 Toyota 4Runner 3.0L V6 Left Hand Drive sits in the Hoses & Fittings department here, stocked and fitment checked.

Silicone tolerates far more heat than standard rubber and stays flexible for many years. Use constant tension or lined clamps so the hose surface survives heat cycles.

Ordering the hps red 3-ply silicone radiator takes a minute and the confirmation reaches you straight away.

Our team knows the hps red 3-ply silicone radiator well, so ask if anything about the specification is unclear.

Stock of the hps red 3-ply silicone radiator is live on this page rather than estimated.

Shops order the hps red 3-ply silicone radiator from us in volume because the data on the page is accurate.

If your build is unusual, tell us and we will confirm the hps red 3-ply silicone radiator against it.

The hps red 3-ply silicone radiator ships protected, because a damaged part helps nobody.

The important numbers

• Engine: 3.0L V6
• Reinforcement: 3 ply
• Material: Silicone
• Finish: Red
• Position: Left
• Category: Hose Kits
• Price: $313.29 with free shipping over $99
• Availability: in stock, dispatched from the USA

Manufacturer specifications

This HPS High Temp 3-ply Reinforced Silicone Coolant Hose Kit is designed to replace stock OEM rubber radiator, heater, and bypass hoses which weaken over and fail over time. With premium quality silicone and performance inspired design, this coolant hose kit can withstand the harsh, high temperature and high pressure operating conditions under the hood through a wide range of driving conditions.

HPS silicone hose kits have all the correct bends and dimensions to perfectly fit as replacements for OEM rubber coolant hoses. Compared to the universal hoses from the local auto store, HPS silicone hose kits are much easier to work with. Maximum temperature rating: 350 degrees Fahrenheit. 100% stainless steel clamps are included for easy installation.

• Material: 3-Ply Reinforced Silicone
• Color: Red
• Ideal replacement for OEM rubber radiator, heater, and bypass hoses which weaken and fail over time.
• Withstands harsh high temperature and high pressure operating conditions. Max. temperature rating: 350F (177C).
• Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through silicone hoses.
• Engineered to ensure long lasting quality over stock rubber hoses.
• Made with 3-ply reinforced silicone and designed with exact fitment for your vehicle.

Application:

For 1990-1991 Toyota 4Runner 3.0L V6 LHD (SR5)

Remark: Fit Model with Rear Heater, Left Hand Drive ONLY

Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.

Product Content:

• 1 Set x Radiator & Heater Hose Kit
  Hardware if Any is Shown in the Picture Above

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

• 57-2191-RED, 57-2191

Message us the vehicle details and we will confirm compatibility, including anything unusual about your build.

More in this department: Hoses & Fittings · HPS Red Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Blue Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog

Orders are checked against your vehicle details before they are sealed, then dispatched quickly.

Before you start the job, the NHTSA vehicle safety hub is worth five minutes.

Before you order