[Brake & Cargo LED] Clear Len/Red Third Brake Light For 88-00 C/K GMT400

Consider the [Brake & Cargo LED] Clear Len/Red Third Brake Light For 88-00 C/K GMT400 sourced: we stock it, verify it and send it out fast.

Plug in fitment saves hours of splicing, which is why our listings state the connector configuration. Protect new circuits with correctly rated fusing.

The cargo led listed here is checked against your vehicle before dispatch.

Every cargo led order goes through the same fitment review.

Ordering the cargo led takes a minute and the confirmation reaches you straight away.

Our team knows the cargo led well, so ask if anything about the specification is unclear.

Stock of the cargo led is live on this page rather than estimated.

Shops order the cargo led from us in volume because the data on the page is accurate.

If your build is unusual, tell us and we will confirm the cargo led against it.

The cargo led ships protected, because a damaged part helps nobody.

Key details

• Finish: Red
• Category: Electrical & Lighting
• Price: $34.11 with free shipping over $99
• Availability: in stock, dispatched from the USA

Manufacturer specifications

LED third brake light is a quick and simple way to upgrade the look of your pickup truck. When turned on, the bright LEDs (Light Emitting Diodes) shine up to ten times brighter than standard light bulbs. Even when the brake is not depressed, the integrated cargo light (if equipped) gives off plenty of white light to view your gear in the truck bed. The LED third brake light has a durable polycarbonate lens with a free form reflector and is available in Clear or custom Smoked.

• Material: ABS Plastic/Polycarbonate Lens
• Type: Third Brake Light
• Style: Brake & Cargo Light
• Bulb Type: LED
• Voltage: 12V Operation
• Housing Color: Black
• Lens Color: Clear
• Light Color: Red / White
• Low power consumption, plug-and-play operation
• In comparison to OEM lighting, super LED lighting
• It gives the vehicle a unique appearance that is ideal for show use.
• No alterations or drilling are required, may require reuses OEM Hardware
• Uses Existing Bolt Holes & Plug for Installation
• Recommended to use hand screwdriver tool for the installation. Electronic tool can easily screwing too tight and crack the case.

Application:

For 1988-1998 Chevrolet C1500 (GMT400)
For 1994-1999 Chevrolet C1500 Suburban (GMT400)
For 1988-1999 Chevrolet C2500 (GMT400)
For 1994-1999 Chevrolet C2500 Suburban (GMT400)
For 1988-2000 Chevrolet C3500 (GMT400)
For 1988-1998 Chevrolet K1500 (GMT400)
For 1994-1999 Chevrolet K1500 Suburban (GMT400)
For 1988-1998 Chevrolet K2500 (GMT400)
For 1994-1999 Chevrolet K2500 Suburban (GMT400)
For 1988-2000 Chevrolet K3500 (GMT400)

Remark:

Installation: Harness pin may need modification to match vehicle

Product Content:

• 1 x Third Brake Light

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

• BFC-3BL-CHV1088-LED-BK, 16520063, 16521970, 531064

Cargo Light Function Note:

Should your vehicle is NOT equipped with a Cargo Light function but you still wish to install?
You may experience the Cargo Light staying on ALL THE TIME. If you do experience this issue, there are two modifications that may be performed

1. Disable the Cargo Light Function. This can be done by cutting the white 12v Cargo Light power wire. If this is method is chosen it is recommended to cover the wire end with heat shrink tube, wire nuts or electrical tape.

2. Add a switch and run a 12v power wire from your dash to the LED Brake Light. This is will also require cutting the white 12v Cargo Light power wire. Again please cover the plug side of the led wire to prevent electrical issues.

Prior to installation please verify the following:

1. Inspect back circuit board and wire connections
2. Verify circuit board is protected from exposed metal and wires when installing in the vehicle
3. Make sure the following wires are going to their correct locations.

• Black = Ground
• Red = Brake Light (+12v)
• White = Reverse Light (+12v)
• Yellow = Auxiliary or Running Light (+12v)

Give us the VIN and we will check trim, engine option and drive type, the three details that break fitment.

Customers also open: Electrical & Lighting · AISIN Transfer Case Actuator for 2011-2013 Toyota Tundra · AISIN Transfer Case Actuator for 2020 Toyota 4Runner · full catalog

We pack for the worst day the carrier can have, which keeps our damage rate low.

Independent information on this topic lives at the Car Care Council maintenance tips.

Questions we get about this part