Here is the HPS Red Reinforced Silicone Heater Hose Kit For 98-02 LX470/Land Cruiser V8 J100, listed with the specifications that actually decide whether it fits.
Clamp choice matters: constant tension or lined clamps protect the hose surface over heat cycles. Replace both the upper and lower runs while the system is open.
The hps red reinforced silicone heater hose ships protected, because a damaged part helps nobody.
Drivers choose the hps red reinforced silicone heater hose here for honest specification detail and quick dispatch.
Buyers comparing the hps red reinforced silicone heater hose will find the specification detail on this page rather than in a catalog footnote.
Every hps red reinforced silicone heater hose order goes through the same fitment review.
Ordering the hps red reinforced silicone heater hose takes a minute and the confirmation reaches you straight away.
Our team knows the hps red reinforced silicone heater hose well, so ask if anything about the specification is unclear.
Stock of the hps red reinforced silicone heater hose is live on this page rather than estimated.
Specifications
- Material: Silicone
- Finish: Red
- Category: Hose Kits
- Price: $206.48 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
HPS high temperature 3-ply reinforced Red silicone heater hose kit complete 16pcs set (part number 57-1913-RED) replaces 1998-2002 Toyota Land Cruiser 4.7L V8 J100 stock OEM rubber heater coolant hoses with high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F).
Key Features
, The premium grade high-heat resistance reinforced silicone hoses are made with correct bends and curves to ensure perfect fitment.
, Includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses.
, Prevent and fix the coolant leaking and engine overheating problem caused by cracked, damaged or collapsed OEM rubber heater coolant hoses.
, Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat.
, Compatible with OEM part numbers
1629550060, 1629650020
9955620200 L200, 1577750030
1628250040, 1628150030
1626150090, 872456a180
872456a190, 872456A210
872456A220, 872456A800
9955620200, 872456A090
- Replace stock OEM rubber Heater Hoses which can eventually weaken over time, leading to premature failure
- Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C)
- Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses
- Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses.
Application:
For 1998-2002 Lexus LX470 4.7L V8 (J100)
For 1998-2002 Toyota Land Cruiser 4.7L V8 (J100)
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Heater Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-1913-RED, 57-1913, 571913RED
Not sure it matches your vehicle? Send your VIN or your year, make and model and our fitment desk will confirm before you order.
Related parts: Hoses & Fittings · HPS Blue Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Black Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · full catalog
Fast dispatch matters when a vehicle is off the road, which is why we prioritize same day picking.
For safety and service guidance from outside the aftermarket, see the fuel economy maintenance guidance.
Questions we get about this part
Can you check fitment before I order?
Our parts team confirms fitment before the box is sealed. Contact us with your vehicle details and we will settle it in advance.
Do you ship the same day?
Orders placed before early afternoon on a business day usually leave our USA warehouse the same day, and tracking is emailed when the label is created.
What is the return policy?
Returns are handled in one reply for most cases. Keep your order confirmation, since it is the only proof of purchase we need.
Is the part inspected before dispatch?
We verify diameter and reinforcement specification on every hose order.
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M20 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_9ea8f01c-f6ee-43ae-9912-654e10e73c03-300x300.jpg)
![HPS AN 3-Way Tee Adapter (Tee with female on run) Fitting [Tee] [AN -6] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN9261_1_13ceb207-d699-42c1-9a48-035b83f670cc-300x300.jpg)
![HPS AN 3-Way Tee Adapter (Tee with female on run) Fitting [Tee] [AN -8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN9261_1_be005c51-8bd2-46a9-92b6-7e329201ec21-300x300.jpg)
![HPS NPT Hex Plug Fitting [1/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN933_1-300x300.jpg)
Reviews
There are no reviews yet.