The HPS Black 3-Ply Silicone Heater Coolant Hose Kit For 93-95 Toyota 4Runner/Toyota Pickup 3.0L V6 (Left Hand Drive) is available now, with fitment data on the page and a team behind it.

Hoses and fittings work under pressure and heat, where material choice decides service life. Use constant tension or lined clamps so the hose surface survives heat cycles.
The hps black 3-ply silicone heater coolant ships protected, because a damaged part helps nobody.
Drivers choose the hps black 3-ply silicone heater coolant here for honest specification detail and quick dispatch.
Buyers comparing the hps black 3-ply silicone heater coolant will find the specification detail on this page rather than in a catalog footnote.
Every hps black 3-ply silicone heater coolant order goes through the same fitment review.
Ordering the hps black 3-ply silicone heater coolant takes a minute and the confirmation reaches you straight away.
Our team knows the hps black 3-ply silicone heater coolant well, so ask if anything about the specification is unclear.
Stock of the hps black 3-ply silicone heater coolant is live on this page rather than estimated.
Shops order the hps black 3-ply silicone heater coolant from us in volume because the data on the page is accurate.
Part details
- Engine: 3.0L V6
- Reinforcement: 3 ply
- Material: Silicone
- Finish: Black
- Position: Left
- Category: Hose Kits
- Price: $146.21 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This brand new HPS High Temp 3-ply Reinforced Silicone Heater Hose Kit is designed to replace stock OEM heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it’s too late.
Perfect for racing or daily driving application. HPS silicone Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence.
- Ideal replacement or upgrade for OEM or aftermarket parts
- The premium grade high-heat resistance 3-ply reinforced silicone hoses are made with correct bends and curves to ensure a perfect fitment
- Includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses
- Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM heater coolant hoses
- Race proven design with long lasting quality and engineered for extremely high temperature service and prolonged exposure to under-hood and coolant heat
- Maximum temperature rating: 350F
Application:
For 1993-1995 Toyota 4Runner 3.0L V6 (Left Hand Drive)
For 1993-1995 Toyota Pickup 3.0L V6 (Left Hand Drive)
Remark: Fits 3.0L V6 Left Hand Drive. Does not include hoses for model equipped with rear heater
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Heater Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-1323H-BLK, 571323HBLK, 57-1323H, 571323HBLK
Send the old part number or a photo and we will match it against this listing before you commit.
See also: Hoses & Fittings · HPS Black Silicone Radiator Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Red Silicone Heater Hose Kit For 06+ Lexus GS/IS/RC-Series 2.5L 3.5L V6 · full catalog
Parcels leave our USA warehouse promptly and arrive protected, because packaging failures are returns waiting to happen.
For neutral background on this kind of maintenance, see the NHTSA vehicle safety hub.
Frequently asked questions
How do I know this is the right part?
The application text on this page lists what the part serves. If your vehicle is not clearly covered, send the VIN and we will rule on it before you pay.
How fast does this ship?
Orders placed before early afternoon on a business day usually leave our USA warehouse the same day, and tracking is emailed when the label is created.
Is there a warranty on this?
Contact support before removing or returning anything, so the right process starts on the first message and nothing is voided by accident.
Is the part inspected before dispatch?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.
![HPS AN Female Flare Cap Fitting [Straight] [AN -16] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN929_1_c735b1de-9c47-4378-8770-106277ec99ca-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M20 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_9ea8f01c-f6ee-43ae-9912-654e10e73c03-300x300.jpg)
![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-8] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_b7ae2165-4f89-472c-a9fc-72ba3e09b875-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 1/2 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_b76d947d-1e43-4e38-b986-a8f6682cdca6-300x300.jpg)
Reviews
There are no reviews yet.