A vibration that grows with speed is a classic driveshaft complaint. The driveshaft spins fast and carries torque to the axle, so small faults show up as shaking. This guide lists five common causes and what to check in order. Replacement driveshafts and related parts are listed in our drivetrain parts department.

Table of Contents
Worn U joints
U joints let the driveshaft flex as the suspension moves. When they wear, you get vibration at speed and sometimes a clunk when you change from drive to reverse. Grab the shaft and check for play.
A worn center support bearing
Longer driveshafts use a center support. When its rubber or bearing wears, the shaft wobbles and shakes through the floor. The range includes center support parts for several vehicles.
Loose or damaged mounts
Worn mounts let the drivetrain move more than it should and amplify vibration. Inspect them for cracks and movement, and compare options in our mounts listings.
An out of balance or bent shaft
A dent, a lost balance weight or a bent tube makes the shaft spin unevenly. Look for visible damage, and replace the shaft if you find it. Listings such as the Dorman front driveshaft CV joint at the transfer case show how parts are matched to the vehicle.
Wrong angles after a lift or repair
A lift kit or incorrect reassembly changes the driveshaft angle and creates vibration. If the shake started after work on the vehicle, check angles and fitment first.
A simple order of checks
Start with the cheapest parts: check the U joints, the center support, then the mounts and the shaft itself. Fix one thing at a time so you know what cured the vibration.
Choosing replacement parts
Match your make, model, year and drive type. If you are not sure whether you need a joint or a full shaft, contact us with your symptoms and vehicle details before you order.
Which speed shows which driveshaft problem
Note the speed at which the vibration starts. A driveshaft fault often appears at a steady highway speed and goes away above or below it. A shake at idle points more towards engine mounts. A shudder on take off points towards U joints or a worn CV joint. Writing down the speed and load helps you decide which driveshaft part to look at first.
Common driveshaft mistakes
Replacing the whole driveshaft when only a U joint is worn is the most common mistake. Another is greasing sealed joints that do not take a grease nipple. Another is reusing worn bolts, which can loosen under load. Check every bolt and torque it to the figure in the manual.
Price range and a checklist
the shaft parts in our range start low for joints and reach about $175 for assemblies such as the Dorman front the shaft. Before you order, check years, drive type, wheelbase and cab style. Delivery cost and time are shown at checkout. See our drivetrain parts department for every shaft option.
Questions people ask about a driveshaft
Can I drive with a vibrating the shaft? Only for a short distance to a repair, since a failing shaft can drop and cause serious damage. Do I need to balance a new shaft? Quality parts are balanced already, but check after fitting. Is a shaft fitted on front wheel drive cars? Not usually, those cars use axle shafts instead. Can a lift kit cause the shaft vibration? Yes, because it changes the angles.
How to look after a driveshaft
Grease any joints that have a nipple at every service. Inspect the boots and the center support when you have the vehicle raised. Clean mud and debris from the shaft after off road use. If you change the ride height, check the angles at once, because small angle errors cause constant vibration and early wear.
Step by step: tracking a vibration
Note the speed range of the shake. Check tire balance first, because that is the most common cause. Then inspect the U joints and center support for play. Check the mounts, and look at the shaft for dents. Check that the bolts at each end are tight. If everything looks fine, ask a workshop to check balance and angles. Work from cheap checks to expensive ones, and change one part at a time.
Next step
Browse the parts mentioned in this guide, compare listings for your vehicle and check the years before you order. For more background, see fuel economy maintenance advice.