A silicone hose is a popular upgrade for turbo, intake and cooling systems, but it is not right for every job. This guide compares silicone with rubber in five ways so you can decide whether the upgrade pays off. You can see the full range in our hoses and fittings department.

Table of Contents
Heat resistance
Silicone handles high temperatures better than ordinary rubber, which is why it is used around turbos and hot engine bays. If your engine runs hot or boosted, a silicone hose gives more headroom.
Service life
Rubber hoses harden, crack and swell as they age. A silicone hose resists aging better, so it can stay flexible for longer. It is not unbreakable, so inspect any hose at every service.
Pressure and reinforcement
Quality silicone hoses are layered with fabric reinforcement so they hold pressure. Look at the product description for the number of layers and the pressure rating before you buy.
Sizes and shapes
Our range includes straight couplers, reducers and elbows in many inside diameters. Examples include HPS hoses listed in millimetres and inches with a set leg length, such as the HPS reducer in black. Measure your existing hose before you order.
Looks
Silicone comes in black and bright colors. If you care about a clean engine bay, a colored hose is an easy visual upgrade.
Price
A silicone hose costs more than a standard rubber one, with common sizes from about $50. If your hose is stock and in good condition, rubber may be enough. If you tune or tow, the upgrade can pay off.
Fit and clamps
Use the right clamps and check for a snug fit on each end. Match the inside diameter to the pipe, and contact us with your vehicle details if you need help choosing.
Silicone hose and rubber hose compared in a table
| Feature | Silicone hose | Rubber hose |
|---|---|---|
| Heat | Very high | Moderate |
| Aging | Slow | Hardens and cracks |
| Price | Higher | Lower |
A silicone hose wins on heat and aging, and rubber wins on price. Pick the silicone hose where heat and boost make it matter.
Common silicone hose mistakes
Buying a hose by length alone is the biggest mistake. The inside diameter at each end must match the pipe. Another mistake is overtightening clamps, which cuts into the hose. Use wide band clamps and leave a small bead on the pipe so the hose cannot slip off under boost.
Price range and a checklist
A hose in our range starts from about $50, and sets rise from there. Before you order, measure both inside diameters, note the leg length and check the color. Delivery cost and time are shown at checkout. See every hose in our hoses and fittings department.
Questions people ask about a silicone hose
Is a hose safe for coolant? Many are designed for it, but read the listing and the hose rating. Does it fit any clamp? Use wide band clamps. Will it add power? No, a hose is about durability and heat. Can I cut one to length? Straight hose can be cut, but shaped couplers cannot.
Looking after silicone hoses
Check clamps after the first few heat cycles, because silicone settles. Keep oil and fuel off the hose unless the listing says it is fuel safe. Inspect for bulges and rubbing at every service. Replace any hose that looks swollen, split or chafed, whatever the material.
Step by step: replacing a hose
Let the engine cool fully. Drain coolant if the hose carries it. Loosen the clamps and ease the old hose off. Clean the pipe ends, and measure them. Slide the clamps on the new hose first, then push the hose on past the bead. Position and tighten the clamps, refill the coolant, run the engine and check for leaks. Recheck the clamps after the first heat cycles.
Next step
Browse the parts mentioned in this guide, compare listings for your vehicle and check the years before you order. For more background, see fuel economy maintenance advice.