Free shipping over $99/Fitment guaranteed/Same-day dispatch before 3pm ET
,

HPS 3/8″ (9.5mm) ID, with 5″ and 48″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose

$84.08

HPS 3/8″ (9.5mm) ID, with 5″ and 48″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose

Looking for the HPS 3/8″ (9.5mm) ID, with 5″ and 48″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose? It is on the shelf here, checked and ready to ship.

HPS 3/8″ (9.5mm) ID, with 5″ and 48″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose
HPS 3/8″ (9.5mm) ID, with 5″ and 48″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose as supplied by PartSmith Co.

Petroleum contact requires the correct lining, so fuel and oil routing needs the right specification. Replace both the upper and lower runs while the system is open.

The leg long black 4-ply reinforced ships protected, because a damaged part helps nobody.

Drivers choose the leg long black 4-ply reinforced here for honest specification detail and quick dispatch.

Buyers comparing the leg long black 4-ply reinforced will find the specification detail on this page rather than in a catalog footnote.

The leg long black 4-ply reinforced listed here is checked against your vehicle before dispatch.

Every leg long black 4-ply reinforced order goes through the same fitment review.

Ordering the leg long black 4-ply reinforced takes a minute and the confirmation reaches you straight away.

Our team knows the leg long black 4-ply reinforced well, so ask if anything about the specification is unclear.

Quick specs

  • Reinforcement: 4 ply
  • Material: Silicone
  • Finish: Black
  • Category: Universal Hose
  • Price: $84.08 with free shipping over $99
  • Availability: in stock, dispatched from the USA

Manufacturer specifications

HPS 3/8″ (9.5mm) high temperature 4-ply reinforced Black silicone 90 degree elbow coupler hose with 5″ and 48″ leg meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. This HPS 3/8 inch silicone elbow can be easily trimmed to replace OEM or aftermarket rubber heater hose.

Unlike the traditional rubber heater hose elbow being sold in the auto parts store, HPS performance silicone 90 degree bend elbow coupling hose is designed and engineered to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, heater hoses, supercharger aftercoolers, and air-to-water heat exchangers.

The flexible line makes maneuvering the hose in the engine bay a quick and pain-free process.

Technical Specification
Product Type: Silicone 90 Degree Elbow Coupler Hose
Temperature Range: -65 deg. F to + 350 deg. F (177 deg. C)
Reinforced Layer: 4-ply polyester
Hose Inside Diameter: 3/8″ (9.5mm)
Hose Outside Diameter: 0.73″ (18mm)
Leg Length: 5″ and 48″
Center Line Radius: 3/4″
Wall Thickness: 5mm +/- 0.5mm
Color: Black
UV and ozone resistant

Remark: Silicone hose is NOT compatible with fuel or oil.
Silicone hose is compatible with water or anti-freeze such as coolant.

  • Material: 4-Ply Reinforced Silicone
  • Color: Black
  • Leg length: 5″ and 48″. Can be easily trimmed to replace OEM or aftermarket rubber heater hose.
  • Made of High Temperature 4-ply Reinforced Silicone (Maximum temperature rating 350F)
  • Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications
  • UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil
  • Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system

Application:

Universal Fit

Remark:

Installation: Compatible with Water/Coolant ONLY, Not for Fuel/Oil

Product Content:

  • 1 x 90 Degree Elbow Coupler Hose

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

  • HTSEC90-038-L5x48-BLK, HTSEC90038L5x48BLK

If your vehicle has been modified, tell us, since the factory data will not show a previous owner changes.

Related listings: Hoses & Fittings · HPS 1.75″ (45mm) ID, 6″ Leg Long Black 4-Ply Silicone 1/2″ Offset Coupler Hose · HPS 1.75″ (45mm) ID, 4″ Leg Long Black 4-Ply Silicone 1/2″ Offset Coupler Hose · full catalog

Delivery estimates appear at checkout for your address, with no padding added to the carriage price.

If you want independent guidance before ordering, the NHTSA vehicle safety hub is a useful reference.

Before you order

What do you need to verify fitment?

Share your vehicle details with our team and we cross reference this listing before dispatch. Anything doubtful gets a message from us rather than a shipment.

When will my order dispatch?

We ship from a USA warehouse with quick dispatch, and delivery estimates appear at checkout once you enter your address.

How do returns work here?

A straightforward returns window applies from delivery. Keep the original packaging until you have test fitted the part and contact support for a fast exchange or refund.

How do you protect it in transit?

Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.

Reviews

There are no reviews yet.

Be the first to review “HPS 3/8″ (9.5mm) ID, with 5″ and 48″ Leg Long Black 4-Ply Reinforced Silicone 90 Degree Elbow Coupler Hose”

Your email address will not be published. Required fields are marked *

Scroll to Top