The HPS Red 3-Ply Silicone Radiator Hose Kit For 16+ Lexus GS350 RC350 RC300 3.5L V6 is available now, with fitment data on the page and a team behind it.
Hoses and fittings work under pressure and heat, where material choice decides service life. Measure inner diameter at the fitting rather than estimating by eye.
Buyers comparing the hps red 3-ply silicone radiator hose kit will find the specification detail on this page rather than in a catalog footnote.
The hps red 3-ply silicone radiator hose kit listed here is checked against your vehicle before dispatch.
Every hps red 3-ply silicone radiator hose kit order goes through the same fitment review.
Ordering the hps red 3-ply silicone radiator hose kit takes a minute and the confirmation reaches you straight away.
Our team knows the hps red 3-ply silicone radiator hose kit well, so ask if anything about the specification is unclear.
Stock of the hps red 3-ply silicone radiator hose kit is live on this page rather than estimated.
Shops order the hps red 3-ply silicone radiator hose kit from us in volume because the data on the page is accurate.
At a glance
- Engine: 3.5L V6
- Reinforcement: 3 ply
- Material: Silicone
- Finish: Red
- Category: Hose Kits
- Price: $173.14 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
HPS Performance High Temperature 3-ply Reinforced Silicone Radiator Hose Kit Red is designed to replace stock OEM rubber lower and upper radiator coolant hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving.
HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max Temperature Rating: 350 deg. F (177 deg. C). 100% Stainless Steel Clamps are included for easy installation.
- Material: 3-Ply Reinforced Silicone
- Color: Red
- Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure
- Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C)
- Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses
- Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses.
Application:
For 2016-2020 Lexus GS350 3.5L V6
For 2018-2022 Lexus RC350 3.5L V6
For 2018-2022 Lexus RC300 AWD 3.5L V6
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Radiator Hose Kit
Hardware if Any is Shown in the Picture Above
Product come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-1842-RED, 571842RED, 16571-31380,16566-31030,16573-31060,16572-31450
If your vehicle has been modified, tell us, since the factory data will not show a previous owner changes.
Keep shopping: Hoses & Fittings · HPS Black 3-Ply Reinforced Silicone Breather Hose Kit For 95-98 Nissan Skyline GTR RB26DETT Twin Turbo (R33) · HPS Black Ancillary Hose Kit (Bypass Coolant Hose) For 01-05 Mazda Miata 1.8L Non Turbo (NB2) · full catalog
Every parcel carries tracking that updates with each carrier scan until it reaches your door.
For safety and service guidance from outside the aftermarket, see the fuel economy maintenance guidance.
Quick answers
Can you check fitment before I order?
Share your vehicle details with our team and we cross reference this listing before dispatch. Anything doubtful gets a message from us rather than a shipment.
When will my order dispatch?
Orders placed before early afternoon on a business day usually leave our USA warehouse the same day, and tracking is emailed when the label is created.
Is there a warranty on this?
Contact support before removing or returning anything, so the right process starts on the first message and nothing is voided by accident.
How do you verify this part?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.
![HPS NPT Allen Plug Fitting [1/2 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN932_1_905b27b0-3c7d-4fa0-ad9c-55f954a9d8c0-300x300.jpg)
![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-12] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_635e984b-3fc3-4cc7-aaac-b24669ef133f-300x300.jpg)
![HPS Push-on Hose End to AN Female Fitting [120 Degree] [-10] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/150-120_1_2ac48160-6f50-4c53-8c37-0cf776a30fac-300x300.jpg)
Reviews
There are no reviews yet.