Order the HPS Red Silicone Intake Hose Kit For 16-22 Tacoma 3.5L V6 N300 equipped with TRD Airbox from a parts team that verifies fitment before anything leaves the building.

Hoses and fittings work under pressure and heat, where material choice decides service life. Keep petroleum away from standard silicone unless the hose is lined for it.
If your build is unusual, tell us and we will confirm the hps red silicone intake hose kit for 16 against it.
The hps red silicone intake hose kit for 16 ships protected, because a damaged part helps nobody.
Drivers choose the hps red silicone intake hose kit for 16 here for honest specification detail and quick dispatch.
Buyers comparing the hps red silicone intake hose kit for 16 will find the specification detail on this page rather than in a catalog footnote.
Every hps red silicone intake hose kit for 16 order goes through the same fitment review.
Ordering the hps red silicone intake hose kit for 16 takes a minute and the confirmation reaches you straight away.
Our team knows the hps red silicone intake hose kit for 16 well, so ask if anything about the specification is unclear.
Quick specs
- Engine: 3.5L V6
- Material: Silicone
- Finish: Red
- Category: Hose Kits
- Price: $236.24 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS high temperature 4-ply reinforced silicone air intake hose kit replaces the TRD Performance air intake hose with high-heat resistant material which meets or exceeds OE specifications for a maximum temperature rating of 350 degrees Fahrenheit. By replacing the TRD intake tube with the HPS silicone air intake kit, dyno testing shows increased performance output of 21.9 horsepower and 28.8 lb-ft. of torque. Acceleration is greatly improved over the standard TRD parts.
This intake kit retains the use of the TRD air filter housing, minimizing the number of parts to change and keeping the installation simple. This replacement upgrade includes HPS 100% stainless steel embossed hose clamps that are fit for harshest driving conditions. No modifications are required to install this kit. REMARK: ONLY fits Toyota Tacoma with a TRD Performance Upper Airbox.
- Material: 4-Ply Reinforced Silicone
- Color: Red
- Powerful upgrade to the Toyota TRD Performance Air Intake that adds 21.9 horsepower and 28.8 lb-ft. of torque for faster acceleration and better throttle response.;Intensifies induction sound during acceleration.
- Intensifies induction sound during acceleration.
- Minimizes heat soak to maintain peak performance under any driving condition.
- Includes HPS 100% stainless steel embossed hose clamps.
- Replaces OEM PN: PTR03-35160-AB, PTR03-35160-AC, PTR03-35160-AD.
Application:
For 2016-2022 Toyota Tacoma 3.5L V6 (N300 3rd Gen) equipped with TRD airbox ONLY
Remark: Part Number 57-2126 only fits 3rd Gen Tacoma equipped with TRD Performance Air Intake System (part # PTR03-35160), if your Tacoma is equipped with standard air intake system (including TRD panel air filter), please purchase part number 57-1600 instead
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Intake Hose Kit
Hardware if Any is Shwon in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-2126-RED, PTR03-35160-AB, PTR03-35160-AC, PTR03-35160-AD , 572126RED
Shops ordering in volume can send a full parts list and we will verify the whole job in one reply.
Keep shopping: Hoses & Fittings · HPS Black 3-Ply Reinforced Silicone Breather Hose Kit For 95-98 Nissan Skyline GTR RB26DETT Twin Turbo (R33) · HPS Black Ancillary Hose Kit (Bypass Coolant Hose) For 01-05 Mazda Miata 1.8L Non Turbo (NB2) · full catalog
Same business day dispatch applies to orders placed before early afternoon, and every parcel travels tracked.
If you want independent guidance before ordering, the fuel economy maintenance guidance is a useful reference.
Before you order
Is fitment guaranteed on this listing?
The application text on this page lists what the part serves. If your vehicle is not clearly covered, send the VIN and we will rule on it before you pay.
How fast does this ship?
Same business day dispatch applies to orders placed before the early afternoon cutoff, with tracking that updates at every carrier scan.
What if it does not fit?
If the part does not fit, message our support desk with the order number and we will arrange an exchange or refund. Keep the packaging until the test fit is done.
How do you verify this part?
We verify diameter and reinforcement specification on every hose order.
![HPS NPT Allen Plug Fitting [1/16 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN932_1-300x300.jpg)
![HPS NPT Allen Plug Fitting [1/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN932_1_11e3bb56-b4df-4954-84cd-0d354b2dd8ff-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-8 to M14 x 1.25] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_2d43096e-0176-48a6-aafa-d4ad5b2e739f-300x300.jpg)
![HPS NPT Allen Plug Fitting [3/8 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN932_1_6be249de-b49f-4373-8667-06e8edb296af-300x300.jpg)
Reviews
There are no reviews yet.