The HPS Black 3-Ply Reinforced Silicone Radiator Hose Kit For 07-13 BMW 335i 3.0L Turbo N54 N55 (E90/E92/E93) is one of our steady sellers in Hoses & Fittings, and it ships from the USA.

Reinforcement ply count determines burst strength, which matters most on boosted applications. Use constant tension or lined clamps so the hose surface survives heat cycles.
If your build is unusual, tell us and we will confirm the hps black 3-ply reinforced silicone against it.
The hps black 3-ply reinforced silicone ships protected, because a damaged part helps nobody.
Drivers choose the hps black 3-ply reinforced silicone here for honest specification detail and quick dispatch.
Buyers comparing the hps black 3-ply reinforced silicone will find the specification detail on this page rather than in a catalog footnote.
Every hps black 3-ply reinforced silicone order goes through the same fitment review.
Ordering the hps black 3-ply reinforced silicone takes a minute and the confirmation reaches you straight away.
Specifications
- Engine: 3.0L
- Reinforcement: 3 ply
- Material: Silicone
- Finish: Black
- Category: Hose Kits
- Price: $117.33 with free shipping over $99
- Availability: in stock, dispatched from the USA
Manufacturer specifications
This HPS High Temp 3-ply Reinforced Silicone Heater Coolant Hose Kit is designed to replace stock OEM rubber heater hoses which weaken and fail over time. With premium quality silicone and performance inspired design, this coolant hose kit can withstand the harsh, high temperature and high pressure operating conditions under the hood through a wide range of driving conditions.
HPS silicone hose kits have all the correct bends and dimensions to perfectly fit as replacements for OEM rubber coolant hoses. Compared to the universal hoses from the local auto store, HPS silicone hose kits are much easier to work with. Maximum temperature rating: 350 degrees Fahrenheit. 100% stainless steel clamps are included for easy installation.
- Material: 3-Ply Reinforced Silicone
- Color: Black
- Ideal replacement for OEM rubber heater hoses which weaken and fail over time.
- Withstands harsh high temperature and high pressure operating conditions that range from daily driving to heavy towing. Max. temperature rating: 350F (177C).
- Includes HPS 100% stainless steel industrial grade embossed hose clamps which will not cut through silicone hoses.
- Engineered to ensure long lasting quality over stock rubber hoses.
- Replaces OEM part numbers: 64219208184, 64219208169
Application:
For 2007-2013 BMW 335i/335i xDrive/335is 3.0L Turbo N54 N55 (E90/E92/E93)
Remark:
Installation: Silicone hose water permeation rate is 10 to 15 times greater than standard EPDM rubber hose. Checking water level regularly is highly recommended when silicone coolant hoses are used in a daily driving vehicle.
Product Content:
- 1 Set x Radiator Hose Kit
Hardware if Any is Shown in the Picture Above
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
- 57-2159-BLK, 64219208184, 64219208169, 57-2159
Shops ordering in volume can send a full parts list and we will verify the whole job in one reply.
Related parts: Hoses & Fittings · HPS Black Silicone Heater Hose Kit For 99-01 Jeep Cherokee 4.0L (XJ) Right Hand Drive · HPS Blue 3-Ply Reinforced Silicone Breather Hose Kit For 95-98 Nissan Skyline GTR RB26DETT Twin Turbo (R33) · full catalog
You get honest delivery estimates rather than optimistic ones, quoted live for your address.
Before you start the job, the NHTSA vehicle safety hub is worth five minutes.
Buyer questions
Can you check fitment before I order?
Our parts team confirms fitment before the box is sealed. Contact us with your vehicle details and we will settle it in advance.
When will my order dispatch?
We ship from a USA warehouse with quick dispatch, and delivery estimates appear at checkout once you enter your address.
Can I return this part?
If the part does not fit, message our support desk with the order number and we will arrange an exchange or refund. Keep the packaging until the test fit is done.
How do you verify this part?
Lines and fittings are checked for pressure rating, inner diameter and ply count before shipping.
![HPS AN Female Flare Cap Fitting [Straight] [AN -16] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN929_1_c735b1de-9c47-4378-8770-106277ec99ca-300x300.jpg)
![HPS AN Male to NPT Adapter Fitting [Straight] [-8 to 1/4 NPT] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_8fbe7cf9-52b7-41cb-9b7c-e7396fcd09ae-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M22 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_84a0bab4-582d-4dc1-a176-6237879f811f-300x300.jpg)
![HPS AN Male to Metric Adapter Fitting [Straight] [-6 to M20 x 1.5] (Aluminum, Black)](https://partsmithco.com/wp-content/uploads/2026/07/AN816-06-X_pic1_1_9ea8f01c-f6ee-43ae-9912-654e10e73c03-300x300.jpg)
Reviews
There are no reviews yet.